Algoritmi | User | Sílvio Carmo Silva
Sílvio Carmo Silva
Sílvio Carmo Silva
At Algoritmi
Academic Degree
PhD
Current Position
Associate Professor at Escola de Engenharia da Universidade do Minho
Personal Webpage
Personal Email
scarmo@dps.uminho.ptOrcid
0000-0002-5645-3127Researcher ID
FCT Public Key
J01229224J59
Ciência ID
Google Scholar
h-index
12Publications
61Editorial
0Citations
394Q1 / Q2
14About Me 
S. Carmo-Silva, is Portuguese, obtained a graduate degree (five year university course) in Mechanical Engineering from Oporto University in 1976, a Master of Science in Management and Technology from University of Wales Institute of Science and Technology, in 1980, and a PhD in Manufacturing Engineering, from Loughborough University of Technology, in UK, in the year 1988. Presently he is a research member of the ALGORITMI research centre of the University of Minho, in Portugal and a retired Associate Professor of the Department of Production and Systems of the same university. He has five years of industrial experience, mainly in the apparel, steelworks and shipyards industrial sectors, most of them as a graduated Mechanical Engineer. His industrial and academic focus is on Production Planning and Control (PPC). He has developed research on production systems Design and Production Activity Control, with an emphasis on production control systems and workload control. As an important tool of research he has been using computer simulation. He maintained a link with industry through collaborating research projects and supervised with success a few dozens of post-graduate projects, seven of which were PhD projects. He is also author and co-author of more than one hundred papers, communications and book chapters, published in top international journals, books and conference proceedings. Under the Master courses in Systems Engineering and Industrial Engineering and Management of the University of Minho, Professor Carmo-Silva was responsible for several curricular units including, Production Activity Control, Production Systems Organization and Production Management, and was, in the past, responsible and promoter of many others, such as Computer Aided Manufacturing, Work-study and Fundamentals of Ergonomics, Quality Control and Reliability, Elements of Design for Manufacture, Flexible Manufacturing Systems and Production Systems Design. He was in the past head of the Department of Production Systems, head of the Centre for Production Systems Engineering for several years, and coordinator, for more than two decades, of the research and teaching group of Systems and Industrial Management (Grupo de Gestão Industrial e de Sistemas) of the University of Minho, at the Department of Production Systems.
Publications (63)
Improving Urgency-Based Backlog Sequencing of Jobs: An Assessment by Simulation
Machines
2022 | journal-article
Lot synchronization in make-to-order shops with order release control: an assessment by simulation
International Journal of Production Research
2020 | journal-article
Literature review on autonomous production control methods
Enterprise Information Systems
2020 | journal-article
Workload control and optimised order release: an assessment by simulation
International Journal of Production Research
2020 | journal-article
Extending the POLCA production control system with centralized job release
Production
2020 | journal-article
POLC-A: an assessment of POLCA’s authorization element
Journal of Intelligent Manufacturing
2019 | journal-article
Designing and implementing interdisciplinary projects in a systems engineering master programme
International Symposium on Project Approaches in Engineering Education
2018 | conference-paper
Generic POLCA: An assessment of the pool sequencing decision for job release
Advances in Intelligent Systems and Computing
2018 | book
Improving materials flow through autonomous production control
Journal of Industrial and Production Engineering
2018 | journal-article
Iterative optimization-based simulation: A decision support tool for job release
Advances in Intelligent Systems and Computing
2018 | book
Load-Based Generic Polca: Performance Assessement Using Simulation
Lecture Notes in Networks and Systems
2018 | book-chapter
Lot splitting under load-limiting order release in high-variety shops: An assessment by simulation
Journal of Manufacturing Systems
2018 | journal-article
A comparison of production control systems in a flexible flow shop
Procedia Manufacturing
2017 | journal-article
Bottleneck-oriented order release: An assessment by simulation
Advances in Intelligent Systems and Computing
2017 | book
Comparative Simulation Study of Production Scheduling in the Hybrid and the Parallel Flow
Management and Production Engineering Review
2017 | journal-article
Improving performance in POLCA controlled high variety shops: An assessment by simulation
Journal of Manufacturing Systems
2017 | journal-article
Improving workload control order release: Incorporating a starvation avoidance trigger into continuous release
International Journal of Production Economics
2017 | journal-article
Load-based POLCA: An assessment of the load accounting approach
Advances in Intelligent Systems and Computing
2017 | book
Load-based generic polca: Performance assessement using simulation
International Journal of Mechatronics and Applied Mechanics
2017 | journal-article
Aligning workload control theory and practice: Lot splitting and operation overlapping issues
International Journal of Production Research
2016 | journal-article
Are card-based systems effective for make-to-order production?
Romanian Review Precision Mechanics, Optics and Mechatronics
2016 | journal-article
Improving production logistics through materials flow control and lot splitting
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
2016 | book
A simulation study of the make-to-stock and make-to-order production
21st European Concurrent Engineering Conference 2015, ECEC 2015, 11th Future Business Technology Conference, FUBUTEC 2015 and 19th Euromedia Conference, EUROMEDIA 2015
2015 | conference-paper
Lot splitting in the context of workload control: An assessment by simulation
Romanian Review Precision Mechanics, Optics and Mechatronics
2015 | journal-article
Materials flow control in hybrid make-to-stock/make-to-order manufacturing
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
2015 | book
Order release in the hybrid MTO-FTO production
International Journal of Production Economics
2015 | journal-article
Card-based versus workload-based production order release mechanisms: Performance assessment via simulation
Romanian Review Precision Mechanics, Optics and Mechatronics
2014 | journal-article
Comparing card-based production control mechanisms in MTO production
Modelling and Simulation 2014 - European Simulation and Modelling Conference, ESM 2014
2014 | conference-paper
How continuous workload-based release methods perform in flow shops?
Romanian Review Precision Mechanics, Optics and Mechatronics
2014 | journal-article
Scheduling in product oriented manufacturing systems: Comparing hybrid flowshop with parallel-machine flowshop - An industrial study
2014 6th World Congress on Nature and Biologically Inspired Computing, NaBIC 2014
2014 | conference-paper
Workload control in unbalanced job shops
International Journal of Production Research
2014 | journal-article
Comparing material flow control mechanisms using simulation optimization
12th International Conference on Modeling and Applied Simulation, MAS 2013, Held at the International Multidisciplinary Modeling and Simulation Multiconference, I3M 2013
2013 | conference-paper
Product documentation management through REST-based web service
Intelligent Systems, Control and Automation: Science and Engineering
2013 | book
Web-based decision support system for orders planning
Intelligent Systems, Control and Automation: Science and Engineering
2013 | book
Workload control and order release in combined MTO-MTS production
Romanian Review Precision Mechanics, Optics and Mechatronics
2013 | journal-article
Workload control and order release: The influence of the location of protective capacity
Lecture Notes in Engineering and Computer Science
2013 | journal-article
A practical methodology for cellular manufacturing systems design - An industrial study
Romanian Review Precision Mechanics, Optics and Mechatronics
2012 | journal-article
The influence of batch splitting on Workload Control
Romanian Review Precision Mechanics, Optics and Mechatronics
2012 | journal-article
An application of the smed methodology in an electric power controls company
Romanian Review Precision Mechanics, Optics and Mechatronics
2011 | journal-article
How to release orders in assembly job shops?
Romanian Review Precision Mechanics, Optics and Mechatronics
2011 | journal-article
Order release in a workload controlled flow-shop with sequence-dependent set-up times
International Journal of Production Research
2011 | journal-article
The influence of the order release frequency on job shop logistic performance
17th European Concurrent Engineering Conference 2011, ECEC 2011 - 7th Future Business Technology Conference, FUBUTEC 2011
2011 | conference-paper
Workload control methods stability
ESM 2011 - 2011 European Simulation and Modelling Conference: Modelling and Simulation 2011
2011 | conference-paper
Workload control under continuous order release
International Journal of Production Economics
2011 | journal-article
A document-oriented web-based application for supporting collaborative product development
Romanian Review Precision Mechanics, Optics and Mechatronics
2010 | journal-article
A simulation study of workload accounting methods for WLC
Communications in Computer and Information Science
2010 | book
An architecture for a web service based product configuration information system
Communications in Computer and Information Science
2010 | book
Collaborative product development - A groupware system based on service oriented architecture
Romanian Review Precision Mechanics, Optics and Mechatronics
2010 | journal-article
Web-based decision support system for industrial operations management
Romanian Review Precision Mechanics, Optics and Mechatronics
2010 | journal-article
An ontology for a model of manufacturing scheduling problems to be solved on the web
IFIP International Federation for Information Processing
2008 | book
Comparing workload based order release mechanisms
IFIP International Federation for Information Processing
2008 | book
Distributed design of product oriented manufacturing systems
IFIP International Federation for Information Processing
2007 | book
Generic POLCA-A production and materials flow control mechanism for quick response manufacturing
International Journal of Production Economics
2006 | journal-article
Linking Production Paradigms and Organizational Approaches to Production Systems
Intelligent Production Machines and Systems - 2nd I*PROMS Virtual International Conference 3-14 July 2006
2006 | book
A distributed knowledge base for manufacturing scheduling
IFIP Advances in Information and Communication Technology
2005 | book
An Internet system for scheduling problems solving
2003 | conference-paper
Concurrent scheduling of manufacturing orders
Proceedings of the 10th ISPE International Conference on Concurrent Engineering
2003 | journal-article
Simultaneous manufacturing in batch production
Proceedings of the IEEE International Symposium on Assembly and Task Planning
2003 | conference-paper
A coordination mechanism for real world scheduling problems using genetic algorithms
Proceedings of the 2002 Congress on Evolutionary Computation, CEC 2002
2002 | conference-paper
An XML knowledge base system for scheduling problems
2002 | book-chapter
Mechatronics education at the University of Minho: A summary of the present; Perspectives for the future
Mechatronics
2002 | journal-article
A GA based scheduling system for dynamic single machine problem
Proceedings of the IEEE International Symposium on Assembly and Task Planning
2001 | journal-article
Dynamic scheduling of manufacturing orders: A decision support system approach
Proceedings of the IEEE International Symposium on Assembly and Task Planning
1999 | journal-article
History
| Init | End | Change | Value |
|---|
Improving Urgency-Based Backlog Sequencing of Jobs: An Assessment by Simulation
Machines
2022 | journal-article
Lot synchronization in make-to-order shops with order release control: an assessment by simulation
International Journal of Production Research
2020 | journal-article
Literature review on autonomous production control methods
Enterprise Information Systems
2020 | journal-article
Workload control and optimised order release: an assessment by simulation
International Journal of Production Research
2020 | journal-article
Extending the POLCA production control system with centralized job release
Production
2020 | journal-article
POLC-A: an assessment of POLCA’s authorization element
Journal of Intelligent Manufacturing
2019 | journal-article
Designing and implementing interdisciplinary projects in a systems engineering master programme
International Symposium on Project Approaches in Engineering Education
2018 | conference-paper
Generic POLCA: An assessment of the pool sequencing decision for job release
Advances in Intelligent Systems and Computing
2018 | book
Improving materials flow through autonomous production control
Journal of Industrial and Production Engineering
2018 | journal-article
Iterative optimization-based simulation: A decision support tool for job release
Advances in Intelligent Systems and Computing
2018 | book
Load-Based Generic Polca: Performance Assessement Using Simulation
Lecture Notes in Networks and Systems
2018 | book-chapter
Lot splitting under load-limiting order release in high-variety shops: An assessment by simulation
Journal of Manufacturing Systems
2018 | journal-article
A comparison of production control systems in a flexible flow shop
Procedia Manufacturing
2017 | journal-article
Bottleneck-oriented order release: An assessment by simulation
Advances in Intelligent Systems and Computing
2017 | book
Comparative Simulation Study of Production Scheduling in the Hybrid and the Parallel Flow
Management and Production Engineering Review
2017 | journal-article
Improving performance in POLCA controlled high variety shops: An assessment by simulation
Journal of Manufacturing Systems
2017 | journal-article
Improving workload control order release: Incorporating a starvation avoidance trigger into continuous release
International Journal of Production Economics
2017 | journal-article
Load-based POLCA: An assessment of the load accounting approach
Advances in Intelligent Systems and Computing
2017 | book
Load-based generic polca: Performance assessement using simulation
International Journal of Mechatronics and Applied Mechanics
2017 | journal-article
Aligning workload control theory and practice: Lot splitting and operation overlapping issues
International Journal of Production Research
2016 | journal-article
Are card-based systems effective for make-to-order production?
Romanian Review Precision Mechanics, Optics and Mechatronics
2016 | journal-article
Improving production logistics through materials flow control and lot splitting
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
2016 | book
A simulation study of the make-to-stock and make-to-order production
21st European Concurrent Engineering Conference 2015, ECEC 2015, 11th Future Business Technology Conference, FUBUTEC 2015 and 19th Euromedia Conference, EUROMEDIA 2015
2015 | conference-paper
Lot splitting in the context of workload control: An assessment by simulation
Romanian Review Precision Mechanics, Optics and Mechatronics
2015 | journal-article
Materials flow control in hybrid make-to-stock/make-to-order manufacturing
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
2015 | book
Order release in the hybrid MTO-FTO production
International Journal of Production Economics
2015 | journal-article
Card-based versus workload-based production order release mechanisms: Performance assessment via simulation
Romanian Review Precision Mechanics, Optics and Mechatronics
2014 | journal-article
Comparing card-based production control mechanisms in MTO production
Modelling and Simulation 2014 - European Simulation and Modelling Conference, ESM 2014
2014 | conference-paper
How continuous workload-based release methods perform in flow shops?
Romanian Review Precision Mechanics, Optics and Mechatronics
2014 | journal-article
Scheduling in product oriented manufacturing systems: Comparing hybrid flowshop with parallel-machine flowshop - An industrial study
2014 6th World Congress on Nature and Biologically Inspired Computing, NaBIC 2014
2014 | conference-paper
Workload control in unbalanced job shops
International Journal of Production Research
2014 | journal-article
Comparing material flow control mechanisms using simulation optimization
12th International Conference on Modeling and Applied Simulation, MAS 2013, Held at the International Multidisciplinary Modeling and Simulation Multiconference, I3M 2013
2013 | conference-paper
Product documentation management through REST-based web service
Intelligent Systems, Control and Automation: Science and Engineering
2013 | book
Web-based decision support system for orders planning
Intelligent Systems, Control and Automation: Science and Engineering
2013 | book
Workload control and order release in combined MTO-MTS production
Romanian Review Precision Mechanics, Optics and Mechatronics
2013 | journal-article
Workload control and order release: The influence of the location of protective capacity
Lecture Notes in Engineering and Computer Science
2013 | journal-article
A practical methodology for cellular manufacturing systems design - An industrial study
Romanian Review Precision Mechanics, Optics and Mechatronics
2012 | journal-article
The influence of batch splitting on Workload Control
Romanian Review Precision Mechanics, Optics and Mechatronics
2012 | journal-article
An application of the smed methodology in an electric power controls company
Romanian Review Precision Mechanics, Optics and Mechatronics
2011 | journal-article
How to release orders in assembly job shops?
Romanian Review Precision Mechanics, Optics and Mechatronics
2011 | journal-article
Order release in a workload controlled flow-shop with sequence-dependent set-up times
International Journal of Production Research
2011 | journal-article
The influence of the order release frequency on job shop logistic performance
17th European Concurrent Engineering Conference 2011, ECEC 2011 - 7th Future Business Technology Conference, FUBUTEC 2011
2011 | conference-paper
Workload control methods stability
ESM 2011 - 2011 European Simulation and Modelling Conference: Modelling and Simulation 2011
2011 | conference-paper
Workload control under continuous order release
International Journal of Production Economics
2011 | journal-article
A document-oriented web-based application for supporting collaborative product development
Romanian Review Precision Mechanics, Optics and Mechatronics
2010 | journal-article
A simulation study of workload accounting methods for WLC
Communications in Computer and Information Science
2010 | book
An architecture for a web service based product configuration information system
Communications in Computer and Information Science
2010 | book
Collaborative product development - A groupware system based on service oriented architecture
Romanian Review Precision Mechanics, Optics and Mechatronics
2010 | journal-article
Web-based decision support system for industrial operations management
Romanian Review Precision Mechanics, Optics and Mechatronics
2010 | journal-article
An ontology for a model of manufacturing scheduling problems to be solved on the web
IFIP International Federation for Information Processing
2008 | book
Comparing workload based order release mechanisms
IFIP International Federation for Information Processing
2008 | book
Distributed design of product oriented manufacturing systems
IFIP International Federation for Information Processing
2007 | book
Generic POLCA-A production and materials flow control mechanism for quick response manufacturing
International Journal of Production Economics
2006 | journal-article
Linking Production Paradigms and Organizational Approaches to Production Systems
Intelligent Production Machines and Systems - 2nd I*PROMS Virtual International Conference 3-14 July 2006
2006 | book
A distributed knowledge base for manufacturing scheduling
IFIP Advances in Information and Communication Technology
2005 | book
An Internet system for scheduling problems solving
2003 | conference-paper
Concurrent scheduling of manufacturing orders
Proceedings of the 10th ISPE International Conference on Concurrent Engineering
2003 | journal-article
Simultaneous manufacturing in batch production
Proceedings of the IEEE International Symposium on Assembly and Task Planning
2003 | conference-paper
A coordination mechanism for real world scheduling problems using genetic algorithms
Proceedings of the 2002 Congress on Evolutionary Computation, CEC 2002
2002 | conference-paper
An XML knowledge base system for scheduling problems
2002 | book-chapter
Mechatronics education at the University of Minho: A summary of the present; Perspectives for the future
Mechatronics
2002 | journal-article
A GA based scheduling system for dynamic single machine problem
Proceedings of the IEEE International Symposium on Assembly and Task Planning
2001 | journal-article
Dynamic scheduling of manufacturing orders: A decision support system approach
Proceedings of the IEEE International Symposium on Assembly and Task Planning
1999 | journal-article
| Start | End | Term | Value | |
|---|---|---|---|---|
