Thermal and Fluid Flow Behavior Within an Organ-on-a-Chip Model: A Molecular Dynamics Study

MNHMT2024

2024 | conference-paper

The Infodemic Issue: numerical modelling

OL2A 2024 (OL2A - International Conference on Optimization, Learning Algorithms and Applications 2024)

2024 | conference-paper

Transferable skills development through Project Based Learning in Industrial Engineering and Management Graduation

PAEE/ALE’2024, International Conference on Active Learning in Engineering Education

2024 | conference-paper

Assessment of the thermal comfort of a masonry building

SHO 2024

2024 | conference-paper

Numerical study of fake news propagation

CISTI2024

2024 | conference-paper

Hydrostatic Stability of Marine Tagging Devices

ICIE'2024 (INTERNATIONAL CONFERENCE INNOVATION IN ENGINEERING)

2024 | conference-paper

Use of different thermal insulation materials in a masonry building: trade-off between energy and economic performance

6th International Conference on Energy and Environment: bringing together Engineering and Economics

2024 | conference-paper

Energy simulations of an existing villa converted into a nZEB Building: a case study

ECOS 2024, 37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2024 | conference-paper

Performance Investigation of a Water-Based Photovoltaic Collector System: Velocity and PV Temperature Impact

ICEERE 2024

2024 | conference-paper

CFD simulation of the smoke control process in an underground parking lot – the impact of fire location

ICEERE 2024

2024 | conference-paper

Modelling the envelope change effects in a small building using Energy Plus®

ICEERE 2024

2024 | conference-paper

Numerical Modeling of a Serpentine Tube Photovoltaic/Thermal Collector

ICEERE 2024

2024 | conference-paper

An active learning approach in the Numerical Methods course with students of Chemical and Biological Engineering

14th International Conference Biosystems Engineering 2024 and 17th Baltic Conference on Food Science and Technology FOODBALT 2024

2024 | conference-paper

Improving the Hydrodynamic Performance of Underwater Tags for Blue Shark Monitoring

Inventions

2024 | journal-article

Modelação numérica do comportamento sísmico e energético de um edifício de alvenaria

Sísmica 2024 - 13º Congresso Nacional de Sismologia e Engenharia Sísmica

2024 | conference-paper

Experimental Flow Studies in PDMS Intracranial Aneurysms Manufactured by Two Different Techniques

BIOSTEC 2024

2024 | conference-paper

A Case Study of Standardization of a Project Management Tool in an Automotive Company

Lecture Notes in Mechanical Engineering

2024 | conference-paper

A novel and sustainable PDMS transparent face mask combined with textile fabrics to protect against viruses and particles

Materials Science & Engineering A

2024 | journal-article

Computational Simulations of the Hemodynamics in an Anatomic Carotid Artery Model

ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024)

2024 | conference-abstract

Development of a CFD Model to Study the Fundamental Phenomena Associated with Biomass Combustion in a Grate-fired Boiler

Computers and Fluids

2024 | journal-article

Empowering Future Engineers: Integrating Scientific Literacy and Critical Analysis in the Study of Waste Treatment and Gaseous Effluents

ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024)

2024 | conference-abstract

Energy poverty indicators: a techno-economic perspective from a literature content analysis

Environment, Development and Sustainability

2024 | journal-article

Exergy Analysis for Treatment of Waste Lubricating Oils

ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024)

2024 | conference-abstract

Green Hydrogen Value Chain: Modelling of a PV Power Plant Integrated with H₂ Production for Industry Application

Energies

2024 | journal-article

Heat transfer and fluid dynamics of a single jet impingement – An experimental and numerical approach

International Journal of Thermal Sciences

2024 | journal-article

Intelligent In situ Printing of Multimaterial Bioinks for First-Aid Wound Care Guided by Eye-In-Hand Robot Technology

Advanced Materials Technologies

2024 | journal-article

Numerical Assessment of the Hydrogel Physical Properties' Effect on Oxygen Gradients in an Organ-on-A-Chip Biosystem

SSRN

2024 | other

Numerical evaluation and experimental validation of fluid flow behavior within an organ-on-a-chip model

Computer Methods and Programs in Biomedicine

2024 | journal-article

Spatial Variation of Heat Transfer of a Fluidic Oscillator Jet Impinging on a Flat Surface

ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024)

2024 | conference-abstract

Thermogravimetric Analysis and Kinetic Evaluation of the Combustion of Forestry Residues

Energy & Fuels

2024 | journal-article

A study of ICT access and use by elders from a gender perspective - a case study in Portugal

CENTERIS - International Conference on ENTERprise Information Systems

2023 | conference-paper

Challenges in the digital transaction of an order picking system of an after-sale auto repair shop

CENTERIS - International Conference on ENTERprise Information Systems

2023 | conference-paper

SMOKE CONTROL PROCESS IN AN UNDERGROUND PARKING LOT – CFD SIMULATION

SHO 2023

2023 | conference-paper

Application of SMED to reduce parameterization times in the production of corrugated carton packaging

ICOTEM 2023 – International Conference on Operations and Technology Management

2023 | conference-paper

Simulação CFD da desenfumagem de um parque de estacionamento em caso de incêndio

8JORNINC-3JORPROCIV

2023 | conference-paper

Different Teaching Methods

2023 | book-chapter

A PBL experience with second-year students of Industrial Engineering

International Symposium on Project Approaches in Engineering Education

2023 | conference-paper

A Review of Biomass Thermal Analysis, Kinetics and Product Distribution for Combustion Modeling: From the Micro to Macro Perspective

Energies

2023 | journal-article

AAAEICB: os primeiros 10 anos

AAAEICB

2023 | edited-book

ASSESSMENT OF THE THERMAL COMFORT AND CO2 DISTRIBUTION WITHIN A MOVIE THEATRE

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2023 | conference-paper

Analysis and Validation of a CFD Simulation of the Wind Through a Horizontal Axis Wind Turbine as an Actuator Disc with a Porous Jump Condition

Lecture Notes in Mechanical Engineering

2023 | conference-paper

CFD and Wake Analysis of the Wind Flow Through Two Wind Turbines

Lecture Notes in Electrical Engineering

2023 | conference-paper

Characterization of the physicochemical and thermal properties of different forest residues

Biomass and Bioenergy

2023 | journal-article

Convection from multiple air jet impingement - A review

Applied Thermal Engineering

2023 | journal-article

Dense-Discrete Phase Simulations of Blood Flow in a Stenotic Coronary

Lecture Notes in Computational Vision and Biomechanics

2023 | book-chapter

Design Concept of a Non-invasive Tagging Device for Blue Sharks

Lecture Notes in Mechanical Engineering

2023 | conference-paper

Development of a numerical optimization model for sizing hydrogen refuelling stations: application to a case study

36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2023

2023 | conference-paper

Development of pH-Sensitive Magnetoliposomes Containing Shape Anisotropic Nanoparticles for Potential Application in Combined Cancer Therapy

Nanomaterials

2023 | journal-article

Development of tools to support the production planning in a textile company

Procedia Computer Science

2023 | conference-paper

EXPERIMENTAL ANALYSIS OF THE EFFECT OF FLUIDIC OSCILLATOR GEOMETRY ON HEAT TRANSFER PERFORMANCE

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2023 | conference-paper

Energy and Exergy Analysis of a Biodiesel Plant

36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2023

2023 | conference-paper

Getting Contact to Elderly Associates Through the ICT: An Exploratory Study

Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST

2023 | conference-paper

Implementation of a digital transition process for the documentation of an alumni association

Iberian Conference on Information Systems and Technologies, CISTI

2023 | conference-paper

Influence of Typical Meteorological Years on the Optimization of Incident Solar Radiation for PV Applications in Portugal

Lecture Notes in Electrical Engineering

2023 | conference-paper

Optimization of the flow parameters for a liver organ-on-A-chip computational model

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2023 | conference-paper

Reviver 10

AAAEICB

2023 | edited-book

SATISFACTION AND INTERCULTURAL COMPETENCE DURING AN ERASMUS PROGRAM: A CASE WITH INDUSTRIAL ENGINEERING UNDERGRADUATE STUDENTS AT THE UNIVERSITY OF MINHO, PORTUGAL

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2023 | conference-paper

Simulation Numerical of a Bi-fluid Photovoltaic/Thermal Solar Panel

Lecture Notes in Electrical Engineering

2023 | conference-paper

Simulation and experimental validation of a microfluidic device

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2023 | conference-paper

Skin Follicles Dispersion Within a Hospital Operating Room—How to Predict and Reduce the Contamination

Studies in Systems, Decision and Control

2023 | book-chapter

Thermal Comfort Assessment of a Small House in Portugal Using EnergyPlus and Ansys Fluent

Lecture Notes in Electrical Engineering

2023 | conference-paper

What should I expect from studying abroad? Perceptions of Portuguese students before and during an Erasmus experience

2nd Symposium of Applied Statistics to Business and Management, ICNAAM

2023 | conference-abstract

Assessment of PMV accuracy for different geographic locations using the ASHRAE Thermal Comfort Database II

XV Congreso Iberoamericano de Ingeniería Mecánica 2022

2022 | conference-paper

Influence of temperature on air runoff in the propagation of a forest fire

XV Congreso Iberoamericano de Ingeniería Mecánica 2022

2022 | conference-paper

Normalização de processos de gestão de projetos no departamento de logística de uma empresa do setor automóvel

Encontro Nacional de Engenharia e Gestão Industrial (ENEGI 2022)

2022 | conference-abstract

O contributo da Escolas Industriais no desenvolvimento regional: Um estudo de caso

Encontro Nacional de Engenharia e Gestão Industrial (ENEGI 2022)

2022 | conference-abstract

Simulação CFD do processo de desenfumagem de um parque de estacionamento

Encontro Nacional de Engenharia e Gestão Industrial (ENEGI 2022)

2022 | conference-abstract

Study of the accuracy of thermal comfort index using the ASHRAE database II

Encontro Nacional de Engenharia e Gestão Industrial (ENEGI 2022)

2022 | conference-abstract

Um estudo colaborativo das Escolas Industriais e do seu impacto na região de Braga

Encontro Nacional de Engenharia e Gestão Industrial (ENEGI 2022)

2022 | conference-abstract

Nanotherapeutic effect of graphene-based magnetic nanoparticles as a drug deliver nanocarrier in an advanced microfluidic biochip

9th World Congress of Biomechanics 2022

2022 | conference-abstract

Application of CFD-DEM-Coupling to a Large Scale Biomass Furnace

OFW 17 - OpenFOAM Workshop

2022 | conference-paper

PIV analysis of confined multiple jets impinging on a step surface

Proceedings of the International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics

2022 | journal-article

Visualization of a blood analogue flowing in an organ-on-a-chip platform

9th WORLD CONGRESS OF BIOMECHANICS (WCB 2022)

2022 | conference-abstract

A Brief Review on Decarbonization and Energy Transition of Portuguese Industry: Renewable Energies Incorporation and Efficiency Measures

ECOS 2022, 35th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2022 | conference-paper

Heat transfer augmentation in solar systems using multiple air jet impingement and porous surfaces

ECOS 2022, 35th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2022 | conference-paper

Influence of boundary conditions on oxygen distribution in an organ-on-a-chip platform

ECCOMAS 2022

2022 | conference-paper

Numerical Study of Biomass Combustion in an Industrial Grate-Fired Boiler

13TH EUROPEAN CONFERENCE ON INDUSTRIAL FURNACES AND BOILERS (INFUB-13)

2022 | conference-paper

2D PIV analysis of the flow dynamics of multiple jets impinging on a complex moving plate

International Journal of Heat and Mass Transfer

2022 | journal-article

2D SIMULATION OF THE PLACEMENT OF A PIN-THROUGH-HOLE COMPONENT AND SOLDER PASTE MELTING

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2022 | conference-paper

A Study of Version Control System in Software Development Management Concerning PLC Environments

Lecture Notes in Networks and Systems

2022 | conference-paper

A Systematic Review and Bibliometric Analysis of Wildland Fire Behavior Modeling

Fluids

2022 | journal-article

AN EXPERIMENTAL SETUP TO STUDY THE FUNDAMENTAL PHENOMENA ASSOCIATED WITH BIOMASS COMBUSTION

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2022 | conference-paper

COMPUTATIONAL ANALYSIS OF OXYGEN TRANSPORT IN A LIVER-ON-A-CHIP PLATFORM

Proceedings of the Thermal and Fluids Engineering Summer Conference

2022 | conference-paper

Comparison of CFD and FSI simulations of blood flow in stenotic coronary arteries

Computational Fluid Dynamics

2022 | book-chapter

DEVELOPMENT OF A CONTINUOUS IMPROVEMENT TOOL FOR OUTGOING ERASMUS: FIRST RESULTS

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2022 | conference-paper

DEVELOPMENT OF CFD MODEL TO STUDY THE SPREAD OF WILDFIRES

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2022 | conference-paper

Dashboard for the Management and Acceptance of Customer Orders

Business Systems Research

2022 | journal-article

Development of a Tool for Automatic Coverage Assessment and Simulation of Production Plans

Iberian Conference on Information Systems and Technologies, CISTI

2022 | conference-paper

Diagnosis Methods for COVID-19: A Systematic Review

Micromachines

2022 | journal-article

Editorial for the Special Issue on Micro/Nanofluidic and Lab-on-a-Chip Devices for Biomedical Applications

Micromachines

2022 | journal-article

Energy, Thermal Comfort and Pathologies—A Current Concern

Studies in Systems, Decision and Control

2022 | book-chapter

Evaluation of the Gas Emissions during the Thermochemical Conversion of Eucalyptus Woodchips

Processes

2022 | journal-article

Experimental measurements of the shear force on surface mount components simulating the wave soldering process

Soldering and Surface Mount Technology

2022 | journal-article

Flow dynamics and heat transfer characterization of confined multiple jets impinging on a complex surface

Research Square

2022 | other

Fluid Flow and Structural Numerical Analysis of a Cerebral Aneurysm Model

Fluids

2022 | journal-article

Hemodynamic Studies in Coronary Artery Models Manufactured by 3D Printing

Lecture Notes in Mechanical Engineering

2022 | conference-paper

INFLUENCE OF THE INLET VELOCITY ON OXYGEN GRADIENTS IN A LIVER-ONA-CHIP MODEL

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2022 | conference-paper

Innovative Solar Concentration Systems and Its Potential Application in Angola

Energies

2022 | journal-article

Learning through planning experiments A case study in thermal comfort in hospitals

Iberian Conference on Information Systems and Technologies, CISTI

2022 | conference-paper

Micro/Nanofluidic and Lab-on-a-Chip Devices for Biomedical Applications

MDPI

2022 | book

Numerical Modeling of the Wave Soldering Process and Experimental Validation

Journal of Electronic Packaging, Transactions of the ASME

2022 | journal-article

Occupational Safety & Ergonomics training of Future Industrial Engineers: A Project-Based Learning Approach

Procedia Computer Science

2022 | conference-paper

Organ-on-a-Chip Platforms for Drug Screening and Delivery in Tumor Cells: A Systematic Review

Cancers

2022 | journal-article

PIV Analysis Of Velocity Field And Turbulence Intensity Of Confined Multiple Jets Impinging On A Step Surface

20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics 2020 (POSTPONED)

2022 | conference-abstract

Prediction of Solder Joint Reliability with Applied Acrylic Conformal Coating

Journal of Electronic Materials

2022 | journal-article

Project-Based Learning in a Mechanical Engineering Course: A new proposal based on student's views

International Journal of Mechanical Engineering Education

2022 | journal-article

STUDY OF THE INFLUENCE OF DIFFERENT GEOMETRIES OF AN ORGAN-ON-A-CHIP

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2022 | conference-paper

SUMMER GRANTS 'VERÃO COM CIÊNCIA', FROM FOUNDATION FOR SCIENCE AND TECHNOLOGY, IN PORTUGAL: EXPERIENCE AND ACHIEVEMENTS

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2022 | conference-paper

Study of Mass Loss and Elemental Analysis of Pine Wood Pellets in a Small-Scale Reactor

Energies

2022 | journal-article

The Effect of Acrylic Conformal Coating in the Reliability of Solder Joints

IEEE Transactions on Components, Packaging and Manufacturing Technology

2022 | journal-article

The integration of spheroids and organoids into organ-on-a-chip platforms for tumour research: A review

Bioprinting

2022 | journal-article

i9MASKS Project: A Learning-by-Doing Summer Experience With Engineering Students

Using Technology Tools to Innovate Assessment, Reporting, and Teaching Practices in Engineering Education

2022 | journal-article

i9MASKS Workshop: Extended Abstracts

2022 | edited-book

Integração dos modelos de Rothermel e do tempo mínimo de transmissão para modelação da propagação do fogo

XXI Congresso da Associação Portuguesa de Investigação Operacional – IO2021

2021 | conference-poster

Modelo de propagação do fogo do tempo mínimo de transmissão em gestão florestal

XXI Congresso da Associação Portuguesa de Investigação Operacional – IO2021

2021 | conference-poster

Simulação de incêndios florestais com base no modelo de Rothermel

XXI Congresso da Associação Portuguesa de Investigação Operacional – IO2021

2021 | conference-poster

Blood Flow in Macro and Microfluidic Systems: From Fabrication to Applications

18th International Conference on Flow Dynamics (ICFD2021)

2021 | conference-abstract

Characterization of the Forest Residues Combustion by Thermogravimetric Analysis

17th International Congress on Thermal Analysis and Calorimetry

2021 | conference-abstract

Energy and Comfort in Buildings

8th International Conference on "Energy, Sustainability and Climate Change - ESCC 2021

2021 | conference-abstract

Implementation of a Forest Fire Propagation Model

8th International Conference on "Energy, Sustainability and Climate Crisis" - ESCC 2021

2021 | conference-abstract

Kinetics Study of the Main Forest Residues Used in a Portuguese Power Plant

17th International Congress on Thermal Analysis and Calorimetry

2021 | conference-abstract

BUILDING A PLATFORM TO PROMOTE A BUDDY ERASMUS RELATIONSHIP

ERACON 2021

2021 | conference-paper

POTENTIAL OF FOREST BIOMASS RESIDUES: THERMAL AND ECONOMIC PERSPECTIVES

CIBEK 2021 International Conference on "Circular and Bieconomy"

2021 | conference-paper

Numerical simulation – A study of porosity and space

I9MASKS WORKSHOP

2021 | conference-abstract

Numerical simulation: study on the path of expelled and expired water vapor particles

I9MASKS WORKSHOP

2021 | conference-abstract

PDMS: An analysis on its mechanical properties and transparency

I9MASKS WORKSHOP

2021 | conference-abstract

Numerical study on the path of expelled and exhaled water vapor particles

Symcomp2021

2021 | conference-paper

3d printing techniques and their applications to organ‐on‐a‐chip platforms: A systematic review

Sensors

2021 | journal-article

Analysis and monitoring of the combustion performance in a biomass power plant

Cleaner Engineering and Technology

2021 | journal-article

Application of Taguchi Method for the Analysis of a Multiple Air Jet Impingement System with and without Target Plate Motion

International Journal of Heat and Mass Transfer

2021 | journal-article

Application of a cost-benefit model to evaluate the investment viability of the small-scale cogeneration systems in the portuguese context

International Journal of Sustainable Energy Planning and Management

2021 | journal-article

Blood flow modeling in coronary arteries: A review

Fluids

2021 | journal-article

Building Energy Performance: Comparison Between EnergyPlus and Other Certified Tools

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2021 | conference-paper

Computational simulations in advanced microfluidic devices: A review

Micromachines

2021 | journal-article

Decentralized Forest Biomass Residues Thermal Power Plant Potential: An Economic and Environmental Perspective

ECOS 2021 - 34th International Conference on Efficency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2021 | conference-paper

Energy Performance of a Service Building: Comparison Between EnergyPlus and TRACE700

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2021 | conference-paper

Experimental Analysis of the Flow Dynamics of Multiple Jet Impinging a Non-flat Plate

ECOS 2021 - 34th International Conference on Efficency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2021 | conference-paper

Experimental and numerical study of multiple jets impinging a step surface

Energies

2021 | journal-article

Hemodynamic study in 3D printed stenotic coronary artery models: experimental validation and transient simulation

Computer Methods in Biomechanics and Biomedical Engineering

2021 | journal-article

I9MASKS: FROM A MULTIDISCIPLINARY SUMMER PROJECT TO A NON-ACCREDITED SHORT COURSE

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2021 | conference-paper

I9Masks: A micro step towards the development of PDMS masks for the protection of COVID-19

MEtRICs

2021 | book

INFLUENCE OF NATIONAL CULTURE IN SUPPLY CHAIN INTERNAL INTEGRATION

Proceedings of the 16th International Symposium on Operational Research in Slovenia, SOR 2021

2021 | conference-paper

Learning science during summer vacations and its effects on attitude and anxiety towards research

International Symposium on Project Approaches in Engineering Education

2021 | conference-paper

NUMERICAL SIMULATION OF SOLDER PASTE PRINTING ON THROUGH-HOLE COMPONENTS

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2021 | conference-paper

Numerical Analysis Of Multiple Jets Impinging On A Moving Surface

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2021 | conference-paper

Numerical Simulation Of The Flow Inside A Horizontal Closed Refrigerated Display Cabinet

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2021 | conference-paper

Numerical Tools Developed to Predict the Combustion Behavior inside a 20 kW Pellet Boiler

CEUR Workshop Proceedings

2021 | conference-paper

Numerical flow simulations in a liver-on-a-chip

17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 5th Conference on Imaging and Visualization

2021 | conference-abstract

Numerical modeling and optimization of an air handling unit

Energies

2021 | journal-article

Numerical study of the unsteady flow in simplified and realistic iliac bifurcation models

Fluids

2021 | journal-article

ORDER VARIATION AND FLEXIBILITY RULES DASHBOARD

Proceedings of the 16th International Symposium on Operational Research in Slovenia, SOR 2021

2021 | conference-paper

Polydimethylsiloxane mechanical properties: A systematic review

AIMS Materials Science

2021 | journal-article

STEADY FLOW STUDIES OF THE GEOMETRY EFFECTS ON THE RECIRCULATION PROPERTIES AT THE ILIAC BIFURCATION

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2021 | conference-paper

SURVEY OF EXISTING LITERATURE DATA ON THE BIOMASS COMBUSTION BEHAVIOR IN INDUSTRIAL GRATE-FIRED BOILERS

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2021 | conference-paper

Sawdust drying process in a large-scale pellets facility: An energy and exergy analysis

Cleaner Environmental Systems

2021 | journal-article

The structure of information in the internationalization processes of universities

2021 4th International Conference of the Portuguese Society for Engineering Education, CISPEE 2021

2021 | conference-paper

URGENT ORDERS IMPACT ON MATERIALS MANAGEMENT IN PORTUGUESE CONSTRUCTION SECTOR - CASE STUDY

Proceedings of the 16th International Symposium on Operational Research in Slovenia, SOR 2021

2021 | conference-paper

Influence of Plate Orifice in the Pre-Mixing of Gas-Powered Water Heaters

2020 | conference-paper

Thermal Conversion of Pine Wood and Kinetic Analysis under Oxidative and Non-Oxidative Environments at Low Heating Rate

2020 | conference-paper

3D printed biomodels for flow visualization in stenotic vessels: An experimental and numerical study

Micromachines

2020 | journal-article

Analysis of the cost and energy value of forest biomass production: From harvest to end-use

ECOS 2020 - Proceedings of the 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2020 | conference-paper

Assessment of the Stirling engine performance comparing two renewable energy sources: Solar energy and biomass

Renewable Energy

2020 | journal-article

Energy Performance of a Service Building: Comparison Between EnergyPlus and Revit

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2020 | conference-paper

Experimental and numerical analysis of the influence of the nozzle-to-plate distance in a jet impingement process

International Journal of Thermodynamics

2020 | journal-article

Experimental study of multiple air jets impinging a moving flat plate

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2020 | conference-paper

Experimental study of multiple jets impinging a flat surface

ECOS 2020 - Proceedings of the 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2020 | conference-paper

Fluid–Structure Interaction study of carotid blood flow: Comparison between viscosity models

European Journal of Mechanics, B/Fluids

2020 | journal-article

In vitro biomodels in stenotic arteries to perform blood analogues flow visualizations and measurements: A review

Open Biomedical Engineering Journal

2020 | journal-article

Influence of operating conditions on the thermal behavior and kinetics of pine wood particles using thermogravimetric analysis

Energies

2020 | journal-article

Measurement errors and uncertainty quantification of a two-dimensional-particle image velocimetry experimental setup for jet flow characterization

ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering

2020 | journal-article

Modeling Blood Pulsatile Turbulent Flow in Stenotic Coronary Arteries

International Journal of Biology and Biomedical Engineering

2020 | journal-article

Multi-objective optimization of solar thermal systems applied to portuguese dwellings

Energies

2020 | journal-article

Numerical Analysis of Single Jet Impinging a Flat and Non-flat Plate

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2020 | conference-paper

Numerical simulation of blood pulsatile flow in stenotic coronary arteries: The effect of turbulence modeling and non-Newtonian assumptions

Proceedings - 24th International Conference on Circuits, Systems, Communications and Computers, CSCC 2020

2020 | conference-paper

Numerical study of the flow inside a modular bag filter from a biomass power plant

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2020 | conference-paper

Optimization of Solar Thermal Systems for Buildings

energies

2020 | journal-issue

Students' participation in the internal quality assurance system and their role in enhancing learning

International Symposium on Project Approaches in Engineering Education

2020 | conference-paper

Thermal Simulation of a Supermarket Cold Zone with Integrated Assessment of Human Thermal Comfort

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2020 | conference-paper

Visualization and measurements of blood cells flowing in microfluidic systems and blood rheology: A personalized medicine perspective

Journal of Personalized Medicine

2020 | journal-article

Work-in-progress: Tailoring broad-spectrum, technology-centred IEM studies

IEEE Global Engineering Education Conference, EDUCON

2020 | conference-paper

Occupational safety & ergonomics training based on project-based learning in the industry context

WOS 2019, the 10th International Conference on the Prevention of Accidents at Work

2019 | conference-poster

ECOS 2018 Special Issue

Energy

2019 | journal-issue

The Influence of the Primary Air on the Combustion Performance in an Industrial Boiler

27th European Biomass Conference and Exhibition

2019 | conference-poster

Analysis of the different renewable energy sources in the performance of a Stirling engine

ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2019 | conference-paper

Application of DOE for the Study of a Multiple Jet Impingement System

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2019 | conference-paper

Assessment of Indoor Thermal Conditions in a Cinema Room Using CFD Simulation: A Case Study

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2019 | conference-paper

CFD Prediction of Multiple Jet Impingement in a Reflow Soldering Process

Transactions on Engineering Technologies

2019 | book-chapter

CFD simulation of an Alfa-Stirling engine to study the geometrical parameters on the engine performance

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2019 | conference-paper

Corporate memory in the lean context: Preventing short- andlong-term information loss

Iberian Conference on Information Systems and Technologies, CISTI

2019 | conference-paper

Influence of arterial mechanical properties on carotid blood flow: Comparison of CFD and FSI studies

International Journal of Mechanical Sciences

2019 | journal-article

Influence of the applied load on the creep behaviour of tin-silver-copper solder

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2019 | conference-paper

Influence of the nozzle-to-plate distance in a jet impinging a cold plate – a numerical approach

ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2019 | conference-paper

Integrating Science, Technology, Engineering and Mathematics contents through PBL in an Industrial Engineering and Management first year program

Producao

2019 | journal-article

Measurement errors and uncertainty estimation of an experimental set up using a 2D PIV technique

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2019 | conference-paper

Multi-objective Optimization of Solar Thermal Systems Applied to Residential Building in Portugal

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2019 | conference-paper

Numerical analysis of the influence of the jet-to-jet spacing between two adjacent air jets impinging a flat plate

Proceedings of the Thermal and Fluids Engineering Summer Conference

2019 | conference-paper

Reusing equipment in cells reconfiguration for a lean and sustainable production

Procedia Manufacturing

2019 | conference-paper

Rheology of F620 solder paste and flux

Soldering and Surface Mount Technology

2019 | journal-article

STUDY OF THE ECONOMIC VIABILITY OF COGENERATION SYSTEMS IN PORTUGAL: THE IMPACT OF LEGISLATION ON THE INVESTMENT DECISION

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT (ICEE)

2019 | journal-article

Simulation of PMV and PPD Thermal Comfort Using EnergyPlus

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2019 | conference-paper

Sinopse das Comemorações dos 60 anos de Edifício Carlos Amarante

133 anos a desenhar o futuro

2019 | book-chapter

Thermal energy storage for concentrated solar systems: A technical review and economic considerations

ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2019 | conference-paper

A numerical study of solder paste rolling process for PCB printing

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2018 | conference-paper

An experimental setup for multiple air jet impingement over a surface

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2018 | conference-paper

Application of Cost-Benefit analysis to identify the potential of small-scale cogeneration systems in portuguese building sector

ECOS 2018 - Proceedings of the 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2018 | conference-paper

Application of a biomass combustion model to an industrial boiler

ECOS 2018 - Proceedings of the 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2018 | conference-paper

Combustion modelling of a 20 kW pellet boiler

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2018 | conference-paper

Effect of the Soldering Atmosphere on the Wettability Between Sn4.0Ag0.5Cu (in wt.%) Lead-Free Solder Paste and Various Substrates

Journal of Materials Engineering and Performance

2018 | journal-article

Influence of the microstructure on the creep behaviour of tin-silver-copper solder

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2018 | conference-paper

Multiple jet impingement in reflow soldering - A numerical approach

Lecture Notes in Engineering and Computer Science

2018 | conference-paper

Proceedings of the 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 17th to 21st 2018 - Guimarães, Portugal

Universidade do Minho

2018 | edited-book

Project-Based Learning and its Effects on Freshmen Social Skills in an Engineering Program

Human Capital and Competences in Project Management

2018 | book-chapter

The effect of the heating and air flow rate on the mass loss of pine wood particles

ECOS 2018 - Proceedings of the 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2018 | conference-paper

Thermal comfort assessment of orthopaedic health professionals in an operating room

Occupational Safety and Hygiene VI - Selected contributions from the International Symposium Occupational Safety and Hygiene, SHO 2018

2018 | conference-paper

Thermal-economic optimisation of a CHP gas turbine system by applying a fit-problem genetic algorithm

International Journal of Sustainable Energy

2018 | journal-article

Análise do conforto térmico de uma sala de cinema

CIBEM 2017 – XIII Congresso Ibero-americano de Engenharia Mecânica

2017 | conference-paper

Escoamento de Partículas no interior de uma Caldeira a Biomassa

CIBEM 2017 – XIII Congresso Ibero-americano de Engenharia Mecânica

2017 | conference-paper

Estudo numérico do fluxo sanguíneo como um fluido não-newtoniano nas artérias renais

CIBEM 2017 – XIII Congresso Ibero-americano de Engenharia Mecânica

2017 | conference-paper

Impacto de uma ferramenta de avaliação do ambiente térmico na tomada de decisão de mudança de layout

CIBEM 2017 – XIII Congresso Ibero-americano de Engenharia Mecânica

2017 | conference-paper

Metabolic rate evaluation of an orthopaedic surgeon through oximetry

Occupational Safety and Hygiene - SHO 2017

2017 | conference-paper

Development of a new VHC Device Design to Improve the Efficiency in the Drug Delivery

7º Congresso Nacional de Biomecânica

2017 | conference-paper

CFD Modeling of Combustion in Biomass Furnace

Energy Procedia

2017 | conference-paper

Creep behavior of a solder paste with Bi addition

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2017 | conference-paper

DEVELOPMENT OF A METHODOLOGY TO ESTIMATE THE CAPITAL COSTS OF THERMAL ENERGY STORAGE SYSTEMS

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT (ICEE)

2017 | journal-article

Design of a solar dish Stirling cogeneration system: Application of a multi-objective optimization approach

Applied Thermal Engineering

2017 | journal-article

Modelling stirling engines for CHP applications: Analysis of the mechanical and thermal losses

30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2017

2017 | conference-paper

NUMERICAL SIMULATION OF SALBUTAMOL DEPOSITION IN VHC DEVICES

Journal of Aerosol Medicine and Pulmonary Drug Delivery

2017 | journal-article

Numerical study of the blood flow in the renal arteries

SYMCOMP 2017 - 3rd International Conference on Numerical and Symbolic Computation: Developments and Applications, Proceedings

2017 | conference-paper

Parametric analysis of the thermal components of an alpha-stirling engine for cogeneration applications

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2017 | conference-paper

Rheology characterization of solder paste

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2017 | conference-paper

Study of devolatilization rates of pine wood and mass loss of wood pellets

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2017 | conference-paper

Tutoring experiences in PBL of industrial engineering and management program: Teachers vs students

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2017 | conference-paper

Analysis and Modeling of Combustion in Biomass Furnace

Congreso Nacional de Ingeniería Mecánica

2016 | conference-paper

Ventilation of a Bus Central Station

XXI Congreso Nacional de Ingeniería Mecánica

2016 | conference-paper

Numerical simulation of an industrial worker route using thermal human body software

4th International Conference on Contemporary Problems of Thermal Engineering CPOTE 2016

2016 | conference-paper

A scheduling application to a molding injection machine: a challenge addressed on the 109th European Study Group with Industry

19th European Conference on Mathematics for Industry, ECMI2016

2016 | conference-paper

A correlative cfd study between recirculation area and fpm in VHC design

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2016 | conference-paper

A protocol example on calculation of the metabolism for surgeons in an operating room

International Symposium on Occupational Safety and Hygiene SHO2016

2016 | conference-paper

A protocol proposal on calculation of the metabolic rate for surgeons in an operating room

Sho2016: International Symposium on Occupational Safety and Hygiene

2016 | journal-article

CFD modeling the cooling stage of reflow soldering process

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2016 | conference-paper

Combined Tools for Surgical Case Packages Contents and Cost Optimization: A Preliminary Study

Procedia Computer Science

2016 | conference-paper

Contact angle measurement of SAC 305 solder: numerical and experimental approach

Journal of Materials Science: Materials in Electronics

2016 | journal-article

Energy and exergy analysis of a biomass power plant

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2016 | conference-paper

Experimental analysis of a finless gas-liquid heat exchanger

4th International Conference on Contemporary Problems of Thermal Engineering CPOTE 2016

2016 | conference-paper

Influence of Copper Layer Content in the Elastic and Damping Behavior of Glass-Fiber/Epoxy-Resin Composites

Applied Composite Materials

2016 | journal-article

Numerical modeling of the physical parameters of the thermal environment in industrial contexts

Occupational Safety and Hygiene IV - Selected, Extended and Revised Contributions from the International Symposium Occupational Safety and Hygiene, 2016

2016 | conference-paper

SPACE CHAMBER DEVICES IN VITRO PERFORMANCE EVALUATION AT CONSTANT FLOW

Journal of Aerosol Medicine and Pulmonary Drug Delivery

2016 | journal-article

Thermal driven dispersion of smoke in a parking space

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2016 | conference-paper

Thermal-economic design of a solar dish stirling cogeneration system using a multi-objective approach

ECOS 2016 - Proceedings of the 29th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems

2016 | conference-paper

Thermodynamic and economic optimization of a solar-powered Stirling engine for micro-cogeneration purposes

Energy

2016 | journal-article

Application of GA in the Design of a Stirling Engine-Based Micro-CHP System

EURO 2015 - 27th European Conference on Operational Research

2015 | conference-abstract

A form-closed cam-follower mechanism for a breath simulator machine

Mechanisms and Machine Science

2015 | conference-paper

Abstracts: Drug Delivery to the Lungs 25 Abstracts

JOURNAL OF AEROSOL MEDICINE AND PULMONARY DRUG DELIVERY

2015 | journal-article

Application of genetic algorithms in the optimization of a thermal system based on micro-chp gas turbines

ECOS 2015 - 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems

2015 | conference-paper

Design optimization of a solar dish collector for its application with stirling engines

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2015 | conference-paper

EFFICIENCY OF VALVED HOLDING CHAMBERS: EXPERIMENTAL FULL DOSE ASSESSMENT

Journal of Aerosol Medicine and Pulmonary Drug Delivery

2015 | journal-article

Evaluation of thermal comfort levels concerning the spatial arrangement in an operating room

Sho2015: International Symposium on Occupational Safety and Hygiene

2015 | journal-article

Modeling the reflow soldering process in PCB'S

ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2015, collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels

2015 | conference-paper

Modelling the air-fuel mixture in an atmospheric burner

PANACM 2015 - 1st Pan-American Congress on Computational Mechanics, in conjunction with the 11th Argentine Congress on Computational Mechanics, MECOM 2015

2015 | conference-paper

OVERVIEW ON ENERGY TRENDS AND COGENERATION POTENTIAL IN EUROPE

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT (ICEE)

2015 | journal-article

Relatório sobre “Surgical cases packages”

2015 | report

Testing a human thermal software using field investigation from an industrial plant

Occupational Safety and Hygiene III - Selected Extended and Revised Contributions from the International Symposium on Safety and Hygiene

2015 | conference-paper

Thermal comfort assessment of a surgical room through computational fluid dynamics using local PMV index

Work

2015 | journal-article

Thermal-economic design of a micro-gas turbine CHP system using a multi-objective optimization approach

PANACM 2015 - 1st Pan-American Congress on Computational Mechanics, in conjunction with the 11th Argentine Congress on Computational Mechanics, MECOM 2015

2015 | conference-paper

VHC PERFORMANCE EVALUATION AT CONSTANT FLOW

Journal of Aerosol Medicine and Pulmonary Drug Delivery

2015 | journal-article

VHC performance evaluation at constant flow: 30 L/MIN

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2015 | conference-paper

Wetting behaviour of SAC305 solder on different substrates in high vacuum and inert atmosphere

Journal of Materials Science: Materials in Electronics

2015 | journal-article

Assessment of the thermal environment in a textile plant for automotive components

3rd International Congress on Environmental Health (ICEH 2014)

2014 | conference-abstract

Optimization of cogeneration systems applying direct search methods

Optimization 2014

2014 | conference-abstract

Evaluation of VHC's Emitted Dose

6th iMed.ULisboa Postgraduate Students Meeting

2014 | conference-abstract

Analysis of the geometrical parameters of thermal components in a stirling engine

11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014

2014 | conference-paper

COST-BENEFIT MODEL APPLIED TO THE OPTIMIZATION OF THERMAL SYSTEMS BASED ON A STIRLING ENGINE

International Conference on Production Economics and Project Evaluation (icopev)

2014 | journal-article

EFFICIENCY OF VALVED HOLDING CHAMBERS: NUMERICAL COMPARISON STUDY AT CONSTANT FLOW

Journal of Aerosol Medicine and Pulmonary Drug Delivery

2014 | journal-article

Efficiency Evaluation of VHC: a CFD Comparison Study at Constant Flow

2014 | conference-paper

Experimental assessment of Emitted Dose from Valved Holding Chamber devices

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2014 | conference-paper

Flow recirculation in VHC designs

11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014

2014 | conference-paper

Indoor ventilation in Hospital operating rooms

Proceedings - 14th International Conference on Computational Science and Its Applications, ICCSA 2014

2014 | conference-paper

Jet interaction in cross flow: Experimental and numerical model

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2014 | conference-paper

Maximum profit of a cogeneration system based on stirling thermodynamic cycle

Proceedings - 14th International Conference on Computational Science and Its Applications, ICCSA 2014

2014 | conference-paper

Modeling the thermal environment in an operating room

Proceedings of the 15th International Heat Transfer Conference, IHTC 2014

2014 | conference-paper

Modelling and Cost Estimation of Stirling Engine for CHP Applications

2014 | conference-paper

NUMERICAL MODELING OF WAVE SOLDERING IN PCB

ASME International Mechanical Engineering Congress and Exposition (IMECE)

2014 | conference-paper

Numerical study of regenerator configuration in the design of a stirling engine

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2014 | conference-paper

One-way coupling between a CFD model and a transient thermal model of the human body

Occupational Safety and Hygiene II - Selected Extended and Revised Contributions from the International Symposium Occupational Safety and Hygiene, SHO 2014

2014 | conference-paper

Sensibility studies on a transient thermal model of the human body

Proceedings - 14th International Conference on Computational Science and Its Applications, ICCSA 2014

2014 | conference-paper

Technical-economic evaluation of a cogeneration technology considering carbon emission savings

International Journal of Sustainable Energy Planning and Management

2014 | journal-article

Thermal analysis and cost estimation of Stirling cycle engine

WSEAS Transactions on Power Systems

2014 | journal-article

Thermal hydraulic modeling of shell and tube heat exchangers

Proceedings of the 15th International Heat Transfer Conference, IHTC 2014

2014 | conference-paper

Two stage atmospheric burners: Development and verification of a new mass-energy balance model

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2014 | conference-paper

Tecno-Economic and Exergy Analysis of a Small-Scale CHP Unit Based on a Micro-gas Turbine

MICROGEN 3 - International Conference on Microgeneration and Related Technologies 2013

2013 | conference-paper

An experimental setup for API assessment of a valved holding chamber device

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2013 | conference-paper

CFD simulation of two-phase flow in a large scale venturi scrubber

American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM

2013 | conference-paper

DEVELOPMENT AND OPTIMIZATION OF A SMALL SCALE PELLET BURNER

ASME International Mechanical Engineering Congress and Exposition (IMECE)

2013 | conference-paper

Exergy efficiency optimization for gas turbine based cogeneration systems

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2013 | conference-paper

Experimental analysis of particles flow inside the volumatic® spacer

WIT Transactions on Biomedicine and Health

2013 | conference-paper

Flow structure over a simulated bed for coastal cohesive sediment erosion studies

American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM

2013 | conference-paper

PMDI spray plume analysis: ACFD study

Lecture Notes in Engineering and Computer Science

2013 | conference-paper

Stirling micro-CHP based systems: a sustainable innovation?

2013 | conference-paper

Teaching heat exchanger design in mechanical engineering with CFD

American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM

2013 | conference-paper

Testing thermal comfort of trekking boots: An objective and subjective evaluation

Applied Ergonomics

2013 | journal-article

Thermal comfort evaluation of an operating room through CFD methodology

Occupational Safety and Hygiene - Proceedings of the International Symposium on Occupational Safety and Hygiene, SHO 2013

2013 | conference-paper

Thermal- economic modeling of a micro-CHP unit based on a stirling engine

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2013 | conference-paper

Artesanato e Design: O Projeto IMA

2º CIDAG – Conferência Internacional em Design e Artes Gráficas

2012 | conference-paper

Optimization of Small Scale Cogeneration Systems: Comparison of Nonlinear Optimization Algorithms

The first European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference

2012 | conference-paper

Thermal comfort in operating rooms

Colóquio Internacional sobre Segurança e Higiene Ocupacionais – SHO 2012

2012 | conference-abstract

A review of stirling engine technologies applied to micro-cogeneration systems

Proceedings of the 25th International Conference on Efficiency, Cost, Optimization and Simulation of Energy Conversion Systems and Processes, ECOS 2012

2012 | conference-paper

An economic perspective on the optimisation of a small-scale cogeneration system for the Portuguese scenario

Energy

2012 | journal-article

Application of CFD tools to optimize natural building ventilation design

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2012 | conference-paper

Development of new spacer device geometry: A CFD study (Part I)

Computer Methods in Biomechanics and Biomedical Engineering

2012 | journal-article

Evaluation of the performance of three spacers | Avaliação do Desempenho de Três Câmaras de Expansão

Acta Medica Portuguesa

2012 | journal-article

Innovation of Decentralised Power Production: The Sustainability of Micro-Cogeneration for the Portuguese Market

Proceedings of the European Conference on Innovation and Entrepreneurship, Vols 1 and 2

2012 | journal-article

Modeling a stirling engine for cogeneration applications

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2012 | conference-paper

Modeling flow recirculation inside a holding chamber

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2012 | conference-paper

OPTIMIZATION OF A SMALL SCALE PELLET BOILER

ASME International Mechanical Engineering Congress and Exposition (IMECE)

2012 | conference-paper

On solving the profit maximization of small cogeneration systems

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2012 | conference-paper

Produtos e destinos: A recuperação do artesanato do IMA (Minho)

Journal of Tourism and Development/Revista Turismo & Desenvolvimento

2012 | journal-article

Techno-Economic Assessment of Micro-CHP Systems

XVIII International Conference on Industrial Engineering and Operations Management (ICIEOM 2012)

2012 | conference-abstract

pMDI Sprays: Theory, Experiment and Numerical Simulation

Advances in Modeling of Fluid Dynamics

2012 | book-chapter

Estudo e análise experimental do escoamento de fármacos no interior da câmara de expansão Volumatic® com sistema mecânico de simulação do ciclo respiratório

ICEUBI2011 International Conference on Engineering UBI2011 - Innovation and Development

2011 | conference-paper

Thermal environment characterisation using a CFD model

Internationaler Kongress für Arbeitsschutz und Arbeitsmedizin (A+A 2011, Safety, Security and Health at Work International Trade Fair with Congress), Düsseldorf, Germany

2011 | conference-poster

Development of a Numerical Optimization Model for Micro-CHP Applications

E3Forum – Education, Employment, Entrepreneurship, Pavilion of Knowledge – Ciência Viva, Lisbon, Portugal

2011 | conference-poster

Spacer Design Optimization using CFD Software

ECCOMAS CFD & OPTIMIZATION Thematic Conference 2011

2011 | conference-paper

Numerical Study of Local Stenosis Development at Abdominal Aorta Bifurcations

4º Congresso Nacional de Biomecânica

2011 | conference-paper

A lining for the Thermal Comfort of Trekking Boots – Experimental and Numerical Studies

Research Journal of Textile and Apparel

2011 | journal-article

An economic perspective on small-scale cogeneration systems optimisation

Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011

2011 | conference-paper

As publicações do IMA Convívio e Areia Nova

Do Convento ao Instituto – PORTAS PARA A VIDA

2011 | book-chapter

Development of a cost-benefit model for micro CHP systems

2011 | conference-paper

Experimental validation of a CFD model in a thermal environment characterization

ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011

2011 | journal-article

Optimal design of micro-turbine cogeneration systems for the portuguese buildings sector

ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011

2011 | journal-article

Optimization of a small-scale cogeneration system asa function of the thermal demand

2011 | conference-paper

Optimização numérica no projeto de um sistema de cogeração de pequena escala

2011 | conference-paper

Os consumidores e o artesanato têxtil : estudo exploratório das atitudes e percepções

2011 | conference-paper

Testes de conforto térmico aplicados a uma malha multifuncional desenvolvida com novos materiais

2011 | conference-paper

Thermo-Economic Optimization of CHP Systems: from large to small scale applications

International Journal of Engineering and Industrial Management

2011 | journal-article

Validação experimental dum modelo CFD na caracterização de um ambiente térmico ocupacional

4º Congresso Nacional de Biomecânica

2011 | conference-paper

Evolução da Moda no Design de Interiores: O estudo de caso do Instituto Monsenhor Airosa

International Conference Global Fashion: creative and innovative contexts

2010 | conference-paper

Residential Cogeneration System: A Multiobjective Optimization Design

2nd International Conference on Engineering Optimization

2010 | conference-abstract

Conforto Térmico: Aplicação ao Produto

Encuentro Latinoamericano de Diseño 2010

2010 | conference-paper

Modeling toward numerical solution of an applied engineering problem

15th SEFI MWG Seminar and 8th Workshop GFC Mathematical Education of Engineers

2010 | conference-paper

Utilização das TIC pelos professores de três níveis de ensino: um estudo de caso

5ª Conferência Ibérica de Sistemas e Tecnologias de Informação (CISTI 2010)

2010 | conference-paper

CFD study of the Volumatic® spacer: A realist approach

ECCOMAS CFD Fifth European Conference on Computational Fluid Dynamics

2010 | conference-paper

Thermal Comfort Evaluation using a CFD Study and a Transient Thermal Model of the Human Body

ECCOMAS CFD Fifth European Conference on Computational Fluid Dynamics

2010 | conference-paper

Computational Fluid Dynamics Simulations: an Approach to Evaluate Cardiovascular Dysfunction

Modelling Simulation and Optimization

2010 | book-chapter

Computational fluid dynamics applicable to cloth design

ASME International Mechanical Engineering Congress and Exposition, Proceedings

2010 | conference-paper

Contributions to the study of blood flow in the abdominal aorta and its branches

ASME International Mechanical Engineering Congress and Exposition, Proceedings

2010 | conference-paper

Design and development of a new valve geometry for spacer devices

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2010 | conference-paper

Development and evaluation of a micro-cogeneration prototype for residential applications

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2010 | conference-paper

Further developments on the cfd flow analysis inside the volumatic® spacer

Selected Proceedings from the 13th International Congress on Project Engineering

2010 | book-chapter

Nonlinear optimization in a thermo-economic analysis of a small cogeneration system

2010 | conference-paper

O artesanato têxtil e o design de interiores: percepções de valor dos consumidores portugueses

2010 | conference-paper

Physical characterization of estuarine sediments in the northern coast of Portugal

Journal of Coastal Research

2010 | journal-article

Study and development of spacers for pressurized inhaler devices: A project review

ASME International Mechanical Engineering Congress and Exposition, Proceedings

2010 | conference-paper

Study of a pressurized metered-dose inhaler spray parameters in fluent™

WCE 2010 - World Congress on Engineering 2010

2010 | conference-paper

Teaching differential equations in different environments: A first approach

Computer Applications in Engineering Education

2010 | journal-article

The effect of oscillations on the flow patterns near a simulated bed

Coastal Engineering

2010 | journal-article

Thermoeconomical optimization in the design of small-Scale and residential cogeneration systems

ASME International Mechanical Engineering Congress and Exposition, Proceedings

2010 | conference-paper

Use of fluent for the development of a di-si engine

2010 | conference-paper

Small-scale Cogeneration Systems: a Thermo-Economic Analysis

2009 | conference-abstract

Design of an inlet track of a small I.C. engine for swirl enhancement

COBEM 2009 20th International Congress of Mechanical Engineering

2009 | conference-paper

Further Developments on the CFD Flow Analysis Inside the Volumatic Spacer

XIII Congreso Internacional de Ingeniería de Proyectos

2009 | conference-paper

Estudo do conforto térmico : caso de estudo aplicado ao produto

Revista Ceset: Conforto, Eficiência e Segurança no Trabalho

2009 | journal-article

Ensino de métodos numéricos na resolução de equações diferenciais recorrendo a um software de conforto térmico, num curso de engenharia

FINTDI - Fomento e Innovación com Nuevas Tecnologías en la Docencia de la Ingeniería

2009 | conference-paper

Experiments in a large-scale venturi scrubber. Part I: Pressure drop

Chemical Engineering and Processing: Process Intensification

2009 | journal-article

Experiments in large scale venturi scrubber. Part II. Droplet size

Chemical Engineering and Processing: Process Intensification

2009 | journal-article

In-cylinder swirl analysis of different strategies on over-expanded cyclies

2009 | conference-paper

Jovens e artesanato têxtil : que futuro em comum?

2009 | conference-paper

Numerical Study of Blood Flow in a Vessel with Increasing Degree of Stenosis Using Dynamic Meshes

2009 | conference-paper

Revitalization of a small textile factory from the XIX century: patterns database

VAST 2008 : the 9th International Symposium on Virtual Reality, Archaeology, and Intelligent Cultural Heritage ; the 6th EUROGRAPHICS Workshop on Graphics and Cultural Heritage

2008 | conference-paper

3D Simulation of Multiphase Flow in Large-scale Venturi Scrubbers

CHEMPOR'2008: 10th International Chemical and Biological Engineering Conference

2008 | conference-paper

CFD analysis of blood rheology

CHEMPOR'2008: 10th International Chemical and Biological Engineering Conference

2008 | conference-paper

Multiphase Flow Inside the Volumatic Spacer: A CFD Approach

CHEMPOR'2008: 10th International Chemical and Biological Engineering Conference

2008 | conference-paper

Optimization tools and economical issues in the design of a residential cogeneration system

CHEMPOR'2008: 10th International Chemical and Biological Engineering Conference

2008 | conference-paper

Aplicação informática de apoio ao dimensionamento de venturis na indústria têxtil

CLME'2008/IICEM (5º Congresso Luso-Moçambicano de Engenharia/2º Congresso de Engenharia de Moçambique)

2008 | conference-paper

Certificação da qualidade em instituições particulares de solidariedade social

CLME'2008/IICEM (5º Congresso Luso-Moçambicano de Engenharia/2º Congresso de Engenharia de Moçambique)

2008 | conference-paper

Equações diferenciais desde o conceito à aplicação: ferramentas informáticas

CLME'2008/IICEM (5º Congresso Luso-Moçambicano de Engenharia/2º Congresso de Engenharia de Moçambique)

2008 | conference-paper

Instalação experimental para simulação do fluxo sanguíneo na vizinhança da bifurcação ilíaca

CLME'2008/IICEM (5º Congresso Luso-Moçambicano de Engenharia/2º Congresso de Engenharia de Moçambique)

2008 | conference-paper

Modelo computacional do Fluxo Sanguíneo na Aorta abdominal e Artérias Renais: importância da geometria e da malha

CLME'2008/IICEM (5º Congresso Luso-Moçambicano de Engenharia/2º Congresso de Engenharia de Moçambique)

2008 | conference-paper

Necessidade do Estudo de Câmaras de Expansão para Utilização em Crianças Asmáticas

CLME'2008/IICEM (5º Congresso Luso-Moçambicano de Engenharia/2º Congresso de Engenharia de Moçambique)

2008 | conference-paper

Projecto de Vestuário Termicamente Confortável

CLME' 2008 - 5º Congresso Luso-Moçambicano de Engenharia, IICEM - 2º Congresso de Engenharia de Moçambique

2008 | conference-paper

Differential Equations: concepts and applications

ICEE 2008, International Conference on Engineering Education, "New Challanges in Engineering Education and Research in the 21stCentury"

2008 | conference-paper

Thermal comfort of trekking boots: objective versus subjective evaluation

AHFE 2008 - 2nd International Conference on Applied Human Factors and Ergonomics, 12th International Conference on Human Aspects of Advanced Manufacturing (HAAMAHA)

2008 | conference-paper

Computational Model of the Fluid Dynamics in Abdominal Aorta and Renal Branches

8th World Congress on Computational Mechanics and 5th European Congress on Computational Methods in Applied Sciences and Engineering

2008 | conference-abstract

Gas solid flow simulation in a venturi scrubber

8th World Congress on Computational Mechanics and 5th European Congress on Computational Methods in Applied Sciences and Engineering

2008 | conference-abstract

The grid scheme effect on hemodynamics numerical analysis in the iliac arteries

8th World Congress on Computational Mechanics and 5th European Congress on Computational Methods in Applied Sciences and Engineering

2008 | conference-abstract

Development of a lining for the thermal comfort of trekking boots

8th AUTEX Conference – AUTEX2008

2008 | conference-paper

The Spacer Shape Effect on the Flow Field Within the Volumatic and Nebuchamber

17th IASTED Applied Simulation and Modelling International Conference – ASM’2008

2008 | conference-paper

The effect of outflow distribution on the recirculation properties during the cardiac cycle in the iliac bifurcation

17th IASTED Applied Simulation and Modelling International Conference – ASM’2008

2008 | conference-paper

The influence of different grid approaches on a cardiovascular computational model

17th IASTED Applied Simulation and Modelling International Conference – ASM’2008

2008 | conference-paper

Study, Design and Development of Spacer Devices for Pressurized Metered-dose Inhalers

3rd Technology Open Day Conference: Health & Food Technologies

2008 | conference-abstract

The cardiac cycle effect on blood flow in the vicinity of the iliac arteries

3rd Technology Open Day Conference: Health & Food Technologies

2008 | conference-abstract

Desenvolvimento de Calçado Termicamente Confortável

International Symposium on Occupational Safety and Hygiene - SHO2008

2008 | conference-paper

Application of laser anemometry for measuring critical bed shear stress of sediment core samples

Continental Shelf Research

2008 | journal-article

Axial variation of droplet distribution in a venturi scrubber

WIT Transactions on Ecology and the Environment

2008 | journal-article

Experimental study and CFD analysis of the volumatic® spacer

2008 Proceedings of the 3rd Frontiers in Biomedical Devices Conference and Exhibition

2008 | conference-paper

Numerical study of blood fluid rheology in the abdominal aorta

WIT Transactions on Ecology and the Environment

2008 | journal-article

Teaching thermal comfort in the professional courses,Ensinar conforto térmico aos cursos profissionais

CISCI 2008 - Septima Conferencia Iberoamericana en Sistema, Cibernetica e Informatica 5to SIECI 2008, 3er Simposium Internacional en Comunicacion del Conocimiento y Conferencias, CCC 2008 - Memorias

2008 | conference-paper

The influence of renal branches on the iliac arteries blood flow

2008 Proceedings of the 3rd Frontiers in Biomedical Devices Conference and Exhibition

2008 | conference-paper

Development of an experimental facility to collect dust particle in venturi scrubbers

4ª Conferência de Engenharia “Engenharias’07 – Inovação e Desenvolvimento

2007 | conference-paper

Equações diferenciais desde o conceito à aplicação : processos de aprendizagem

4ª Conferência de Engenharia, Engenharias’07 – Inovação e Desenvolvimento

2007 | conference-paper

Estudo de Câmaras de Expansão para Inaladores Pressurizados

4ª Conferência de Engenharia, Engenharias’07 – Inovação e Desenvolvimento

2007 | conference-paper

Numerical Study of the Velocity Profile Effect in the Atherosclerosis Development

4ª Conferência de Engenharia, Engenharias’07 – Inovação e Desenvolvimento

2007 | conference-paper

Percepção do conforto térmico – simulação numérica e experimental versus testes subjectivos

4ª Conferência de Engenharia, Engenharias’07 – Inovação e Desenvolvimento

2007 | conference-paper

Desenvolvimento de Sapato Termicamente Confortável. IN2TEC - Projectos Internos de Inovação e Tecnologia

II Congresso de Hospitalização Privada: 26 Outubro 2007, Guimarães

2007 | conference-poster

Estudo numérico do escoamento de ar na câmara Volumatic®

II Congresso de Hospitalização Privada, Guimarães

2007 | conference-poster

Estudo numérico do fluxo sanguíneo nas artérias ilíacas

II Congresso de Hospitalização Privada, Guimarães

2007 | conference-poster

Simulação computacional do escoamento arterial na região da bifurcação das artérias renais

II Congresso de Hospitalização Privada, Guimarães

2007 | conference-poster

Modelling of large scale venturi scrubbers

9th U.S. National Congress on Computational Mechanics

2007 | conference-paper

Kinematic synthesis of a mechanism able to reproduce the blood flow in arteries

12th IFToMM World Congress

2007 | conference-paper

Conftermal - An easy way to simulate the human thermal comfort

Proceedings of the 16th IASTED International Conference on Applied Simulation and Modelling, ASM 2007

2007 | conference-paper

Performance of a large scale venturi scrubber with 2d boundary layer model

Proceedings of the IASTED International Conference on Modelling, Simulation and Optimatization

2007 | journal-article

Revitalization of a small textile factory from the XIX century

2007 | conference-paper

Revitalização de uma tecelagem do século XIX : desenhos e padrões

2007 | conference-paper

Conforto térmico humano: uma interface gráfica

Interacção – 2ª Conferência Nacional em Interacção Pessoa-Máquina

2006 | conference-paper

Usability test of an interface for human comfort learning tool

2006 International Conference on Frontiers in Education: Computers Science & Computer Engineering

2006 | conference-paper

Development of Thermal Comfortable Shoes

37th International Symposium on Novelties in Textiles

2006 | conference-paper

Design of a test facility to replicate the transient flow in arterial systems

2006 | conference-abstract

Numerical study of a pulsatile flow in the abdominal aorta bifurcation

2006 | conference-abstract

A numerical study of the thermal behavior of calibrators for polymer

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD

2006 | journal-article

CFD graphical interface in MATLAB

2006 International Conference on Frontiers in Education: Computers Science & Computer Engineering

2006 | conference-paper

Development of an experimental facility to test polymer extrusion

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD

2006 | conference-paper

IN²TEC - A multidisciplinary research project involving researchers, students and industry

American Society of Mechanical Engineers, Textile Engineering Division (Publication) TED

2006 | conference-paper

Numerical and experimental studies in the development of new clothing materials

WIT Transactions on Engineering Sciences

2006 | conference-paper

Teaching human thermal comfort through a software graphic interface

Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education

2006 | conference-paper

Teaching partial differential equations with computer-based problem solving

Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education

2006 | conference-paper

A Computer Interface for Human Comfort Calculations

IMC 22: Challenges Facing Manufacturing

2005 | conference-paper

Optimização de um sistema de cogeração de turbina a gás: influência da variação no preço do gás

Congreso de Métodos Numéricos en Engnieria

2005 | conference-paper

Simplified model for the thermal boundary condition in polymer injection

Proceedings of the ASME Summer Heat Transfer Conference

2005 | conference-paper

Study of the TCR during the Injection Moulding

RPD 2004 – Agile Development for Productivity

2004 | conference-paper

Thermal Contact Resistance in Injection Molds

PPS 2004 American Region Meeting

2004 | conference-abstract

Development of a simulated bed for coastal sediment erosion studies

International Conference on Cohesive Sediment Transport, INTERCOH-2003

2003 | conference-paper

A numerical thermoeconomic study of a co-generation plant

ECOS 2003

2003 | conference-paper

Modelling the behaviour of viscous fluids

3º Congresso Luso-Moçambicano de Engenharia

2003 | conference-paper

Numerical method validation of the thermal behaviour of injection moulds

3º Congresso Luso-Moçambicano de Engenharia

2003 | conference-paper

Numerical optimization of a gas turbine cogeneration plant

American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI

2003 | conference-paper

Study of the thermal cooling during the injection moulding cycle on amorphous polymers

PPS-19

2003 | conference-abstract

Thermal performance of injection moulds

International Conference on Rapid Product Development – RPD 2002: Advanced Solutions and Development

2002 | conference-paper

An investigation on the ventilation in operating theatres

IV World Congress on Biomechanics

2002 | conference-paper

Flow measurements over a moving sandy bed

11th International Symposium on Applications of Laser Techniques to Fluid Mechanics

2002 | conference-paper

An Experimental Study of the Thermal Cooling during the Injection Moulding Cycle

PPS-18

2002 | conference-abstract

Effects of viscous dissipation in non isothermal polymer flow

PPS-18

2002 | conference-abstract

Efeitos da dissipação viscosa no escoamento de um fluido polimérico não-isotérmico

V Congreso de Me´todos Nume´ricos en Ingenieri´a

2002 | conference-paper

Modelo de conforto térmico baseado na distribuição da temperatura do corpo humano

V Congreso en Métodos Numéricos en Engnieria

2002 | conference-paper

Modelo de contracção para computação do tempo de contacto na moldação por injecção

V Congreso en Métodos Numéricos en Engnieria

2002 | conference-paper

Modelo numérico para a optimização da ventilação de blocos operatórios

V Congreso en Métodos Numéricos en Engnieria

2002 | conference-paper

Exploração de serviços web no ensino de optimização numérica

Congresso Nacional da APDIO IO2002

2002 | conference-abstract

Models for the optimization of the polymer injection process

Congresso Nacional da APDIO IO2002

2002 | conference-abstract

Thermoeconomic numerical optimization of a cogeneration system

Congresso Nacional da APDIO IO2002

2002 | conference-abstract

Desempenho térmico de moldes de injecção

O Molde

2002 | journal-article

Roughness effects upon the near sediment turbulence patterns

Environmental Studies

2002 | journal-article

Utilização de serviços Web no ensino da engenharia

XIV Congresso Nacional Ordem dos Engenheiros

2002 | conference-abstract

Identification of Requirements for a University Course on Industrial Engineering

3rd International Symposium of Industrial Engineering – SIE 2001

2001 | conference-paper

The application of unstructured grids for modelling thermal cooling in polymer extrusion

ICPR 16 : 16th International Conference on Production Research

2001 | conference-paper

Droplet coalescence in annular two phase flow

International Symposium on Multiphase Flow and Transport Phenomena - MFTP-2000

2000 | conference-paper

Design parameters of effervescent atomizers

MECHATRONICS ´2000

2000 | conference-paper

Thermal Contact Resistance in Injection Moulding

EPS2000

2000 | conference-abstract

Spray simulation using Fluent

International Conf on Liquid Atomization and Sprays Systems

2000 | conference-paper

Flow measurements in a simulated estuary bed

10th International Conference on Applications of Laser Techniques to Fluid Mechanics

2000 | conference-paper

Modelação da Resistência Térmica de Contacto entre Molde e Polímero na Moldação por Injecção

VI Encontro Nacional de Mecânica Aplicada e Computacional

2000 | conference-paper

Evaluation of the Thermal Behaviour of Injection Moulds

International Polymer Processing

2000 | journal-article

Influência das mudanças climáticas na erosão de sedimentos costeiros

Seminário Perspectivas de Gestão Integrada de Ambientes Costeiros

2000 | conference-paper

Modeling Heat Exchangers for Domestic Boilers

First International Conference on Advance Engineering Design

1999 | conference-paper

A quasi-one-dimensional model for gas/solids flow in venturis

Powder Technology

1999 | journal-article

The Thermal Efficiency of Fin-Tube Heat Exchangers

V Encontro Nacional de Mecânica Computacional

1997 | conference-paper

Utilização de Malhas Variáveis na Modelação do Comportamento Térmico de Moldes de Injecção de Termoplásticos

V Encontro Nacional de Mecânica Computacional

1997 | conference-paper

The role of droplets in scrubbing combustion flue gases

Fourth Int Conf on Technologies and Combustion for a Clean Environment

1997 | conference-paper

Modelação do comportamento térmico de moldes de injecção

8º Encontro Nacional da Sociedade Portuguesa de Materiais

1997 | conference-paper

Design and Optimsation of Calibrators for Thermoplastics Profile Extrusion

NAFEMS World Congress '97

1997 | conference-paper

Factors affecting the performance of calibrators for the extrusion of plastics profiles

The thirteenth Annual Meeting of the Polymer Society

1997 | conference-abstract

Evaluation of Thermal Behaviour of Injection Moulds

Polymer Processing Society Europe/Africa Region Meeting

1997 | conference-abstract

Modelling Heat Losses in Domestic Boilers

1997 | conference-paper

Spray simulation, Report N. 2278

Cardiff University

1997 | report

Evaluation and comparison of BEM, FEM and FDM for the solution of some engineering problems

Boundary Element XVIII

1996 | conference-paper

Finite difference methods applicable to the description of injection moulds

MAFELAP '96, The Mathematics of Finite Elements and Applications

1996 | conference-abstract

Modelling the thermal behaviour of injection moulds during the injection moulding cycle

NUPHYMAT '96, Workshop on Numerical and Physical Study of Material Forming Processes

1996 | conference-paper

Modelling the thermal behaviour of moulds during the injection moulding cycle

PPS-12 The Twelfth International Annual Meeting of the Polymer Processing Society

1996 | conference-abstract

Transient thermal behaviour of molds for polymer processing

9th International Conference on Numerical Methods in Thermal Problems

1995 | conference-paper

Modeling of humidification chambers by water evaporation

IV Encontro Nacional de Mecânica Computacional

1995 | conference-paper

Modelling venturi scrubbers for combustion emissions clean-up

Combustion Related Organizations - Common and Unified Symposium of the Italian and Portuguese Sections of the Combustion Institute, CROCUS '94

1994 | conference-paper

EVALUATION OF NOZZLE FOR WATER ATOMIZATION IN AGRICULTURE

ICLASS'94 Sixth International Conference on Liquid Atomization and Spray Systems

1994 | conference-paper

A quasi one dimensional model for gas solid flows in venturis

Fourth International Conference on Multiphase Flow Dynamics in Industrial Plants

1994 | conference-paper

Improved model for pressure drop in venturi scrubbers

Process Safety and Environmental Protection: Transactions of the Institution of Chemical Engineers, Part B

1991 | journal-article

A model for the hydrodynamics of venturis applicable to scrubbers

University of Birmingham School of Chemical Engineering

1989 | dissertation-thesis

An improved model for annular flow in a venturi, Report AERE R-13060

UKAEA

1988 | report