Algoritmi | User | Ana Sofia Pinho Colim
Ana Sofia Pinho Colim
Ana Sofia Pinho Colim
At Algoritmi
Academic Degree
PhD
Current Position
Invited Assistant Professor at Escola de Engenharia da Universidade do Minho
Personal Webpage
Personal Email
ana.colim@dps.uminho.ptOrcid
0000-0003-1138-1534Researcher ID
Q-8087-2018Ciência ID
571A-62D1-BE54Google Scholar
https://scholar.google.com/citations?hl=en&user=9pZZB4UAAAAJh-index
9Publications
62Editorial
0Citations
0Q1 / Q2
4About Me
Ana Colim has a Ph.D. in Industrial and Systems Engineering (concluded in 2017) and a MSc in Human Engineering (concluded in 2009) from the University of Minho (UMinho). She is an Invited Professor on Ergonomics and Human Factors at the Department of Production and Systems, School of Engineering at the UMinho (since 2010). At the UMinho she is a researcher at the ALGORITMI Research Center in the “Industrial Engineering and Management” research line, group of “Ergonomics and Human Factors”. Her areas of scientific interest are Biomechanics, Applied Ergonomics, Occupational Safety and Hygiene, Human-centric design, Lean Manufacturing. Since 2019, she is an Assistant Researcher at DTx - Digital Transformation Colab, where she has developed research in different projects linked to the industry, such as “Symbiotic Human-Robot Collaboration in Joint Manufacturing Tasks” – parts I and II (with total funding of ~536 k€ by ANI and Ikea Industry) and “Human interfacing & mimicking in cyber-physical systems” (prospective project). Among other R&D projects that she has participated in over the last 5 years, the highlight goes to the recent project "I-CATER - Intelligent robotic Coworker Assistant for industrial Tasks with Ergonomics Rationale" funded by FCT, with the reference PTDC/EEI-ROB/3488/2021 and funding of approximately 247 k€. In this project, she is a Task Leader responsible for the day-to-day execution of the project. She was the supervisor of various MSc. dissertations - 16 concluded and 15 ongoing. Currently, she supervises 5 ongoing Ph.D. projects (all of them with MIT Portugal/FCT grants). Ana Colim is a member of the Directive Board of the MSc. course of Human Engineering, at UMinho. She is also a member of the Organizing Committee and International Scientific Committee of the International Symposium on Occupational Safety and Hygiene. She has authored more than 50 papers in international peer-reviewed journals and proceedings of international conferences.
Publications (88)
A novel human-centered methodology for assessing manual-to-collaborative safe conversion of workstations
Safety Science
2025 | journal-article
Digital and Virtual Technologies for Work-Related Biomechanical Risk Assessment: A Scoping Review
Safety
2024 | journal-article
Assessing the Short-Term Effects of Dual Back-Support Exoskeleton within Logistics Operations
Safety
2024 | journal-article
Understanding Musculoskeletal Loadings among Supermarket Checkout Counter Cashiers: A Biomechanical Analysis
Safety
2024 | journal-article
Comparison Between Anthropometric Equipment and Scanners in Hand Measurement
2024 | book-chapter
Development and Implementation of a Management Model of Ergonomic Conditions Supported by Autonomous Teams
2024 | book-chapter
Development of a Questionnaire to Understand Future Users’ Preferences About Human-Centric Autonomous Car Interior
2024 | book-chapter
Development of a Rapid Assessment Method of the Potentiality to Transform Manufacturing Workstations into an Assistive Collaborative System
2024 | book-chapter
Human-Centered Design Approach to the Development of a Graphical User-Interface for Visual Inspection Task: A Use-Case in the Aircraft Manufacturing
2024 | book-chapter
Designing a User-Centered Inspection Device’s Handle for the Aircraft Manufacturing Industry
Applied Sciences
2023 | journal-article
Establishing an anthropometric database: A case for the Portuguese working population
International Journal of Industrial Ergonomics
2023 | journal-article
Development of Guidelines for an Occupational Health and Safety Management Systems Towards Industry 4.0
2023 | book-chapter
Towards the Digital Transformation of Inspection Tasks in Aircraft Manufacturing Through a Human-Centric Design
2023 | book-chapter
Human–Robot Interaction in Industrial Settings: Perception of Multiple Participants at a Crossroad Intersection Scenario with Different Courtesy Cues
Robotics
2022 | journal-article
Ergonomic Study of a Support Interface for the Therapheet Device in the Rehabilitation of the Tibiotarsal Joint
2022 | book-chapter
Simulating Human-Robot Collaboration for Improving Ergonomics and Productivity in an Assembly Workstation: A Case Study
2022 | book-chapter
WIDEA: Waste Identification Diagram with Ergonomic Assessment—Towards the Integration of Lean and Ergonomics
2022 | book-chapter
Decision-Making Framework for Implementing Safer Human-Robot Collaboration Workstations: System Dynamics Modeling
Safety
2021 | journal-article
Digitalization of Musculoskeletal Risk Assessment in a Robotic-Assisted Assembly Workstation
Safety
2021 | journal-article
Ergonomics and Human Factors as a Requirement to Implement Safer Collaborative Robotic Workstations: A Literature Review
Safety
2021 | journal-article
Physical Ergonomic Improvement and Safe Design of an Assembly Workstation through Collaborative Robotics
Safety
2021 | journal-article
Lean Manufacturing and Ergonomics Integration: Defining Productivity and Wellbeing Indicators in a Human–Robot Workstation
Sustainability
2021 | journal-article
Método REBA - Rapid Entire Body Assessment (Hignett & McAtamney, 2000)
2021 | other
Método de Grieco, Occhipinti, Colombini e Molteni (1997)
2021 | other
Otimização da logística interna através da implementação de processos de sincronização no abastecimento às linhas de montagem
2021 | dissertation-thesis
Revised Strain Index RSI (Garg, Moore, & Kapellusch, 2017)
2021 | other
Thermographic differences due to dynamic work tasks on individuals with different obesity levels: a preliminary study
Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization
2020 | journal-article
Kinematics differences between obese and non-obese workers during vertical handling tasks
International Journal of Industrial Ergonomics
2020 | journal-article
Towards an Ergonomic Assessment Framework for Industrial Assembly Workstations—A Case Study
Applied Sciences
2020 | journal-article
Análise e redução do risco de circulação na zona de embalamento do produto acabado numa indústria de mobiliário
2020 | dissertation-thesis
Aplicação combinada de ferramentas Lean e de Ergonomia na melhoria do desempenho dos postos de trabalho numa empresa de capas de assentos para a indústria automóvel
2020 | dissertation-thesis
Ergonomic Assessment in Waste Sorting Jobs with Different Methods
2020 | book-chapter
Ergonomic intervention on a packing workstation with robotic aid - case study at a furniture manufacturing industry
Work
2020 | journal-article
Exposure to Musculoskeletal Risk of Piano Teachers
2020 | book-chapter
Human-Centered Approach for the Design of a Collaborative Robotics Workstation
2020 | book-chapter
Impacto na produção de células de robótica colaborativa em postos de operação manual
2020 | dissertation-thesis
Reducing 3M by Improved Layouts and Ergonomic Intervention in a Lean Journey in a Cork Company
2020 | book-chapter
Robots and human interaction in a furniture manufacturing industry - risk assessment
Advances in Intelligent Systems and Computing
2020 | book
Safety requirements for the design of collaborative robotic workstations in europe a review
2020 | conference-paper
Study and Analysis of a New Device for the Rehabilitation of the Tibiotarsal Joint
2020 | journal-article
The Effects of a Passive Exoskeleton on Muscle Activity and Discomfort in Industrial Tasks
2020 | book-chapter
A influência da utilização de um exoesqueleto passivo nos fatores de risco de lesões musculoesqueléticas durante tarefas industriais
2019 | dissertation-thesis
Effects of workers' Body Mass Index and task conditions on exertion psychophysics during Vertical Handling Tasks
Work
2019 | journal-article
Ergonomic Analysis of a Fuse Insertion, Press-fit and Test Workstation Using EWA Method - Ergonomic Workplace Analysis
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Ergonomic analysis of a bending workplace in a metalworking industry
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Ergonomic analysis of a manual material handling activity in the food sector
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Ergonomic assessment and workstation design in a furniture manufacturing industry—a case study
Studies in Systems, Decision and Control
2019 | book
Ergonomic assessment of a wire terminal crimping workstation
Studies in Systems, Decision and Control
2019 | book
Ergonomic assessment of study' places in an University dormitory - a pilot study
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Ergonomic study of nursing tasks in surgical hospital services
Advances in Intelligent Systems and Computing
2019 | book
Ergonomic study of workplaces at a textile company
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Implementação de um software de gestão de tempo no sistema produtivo automatizado
2019 | dissertation-thesis
Influence of the use of exoskeletons on workers' physical and psychophysical loading - a literature review
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Introduction of a mechanical equipment to assist manual handling loads in a textile industry - Example of an ergonomic study
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Lighting assessment at workplaces in a granite manufacturing company
Studies in Systems, Decision and Control
2019 | book
Manual materials handling: Case study at a portuguese handling company
Studies in Systems, Decision and Control
2019 | book
Noise Evaluation in a Workstation of a Furniture Manufacturer Company
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Obesity effects on muscular activity during lifting and lowering tasks
International Journal of Occupational Safety and Ergonomics
2019 | journal-article
Occupational noise exposure assessment - Case study in a weaving
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Study of risk factors that influence visual fatigue and musculoskeletal stress in an open office
2019 | dissertation-thesis
Thermal analysis of musculoskeletal overload in vertical handling of loads in an heterogeneous sample
Studies in Systems, Decision and Control
2019 | book
Thermal environment in freight transport - the case of a vehicle without air conditioning
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Workers’ Body Constitution as a Risk Factor During Manual Materials Handling
Advances in Intelligent Systems and Computing
2019 | book
Analysis of infrared imaging during vertical handling tasks in workers with different levels of obesity
Advances in Intelligent Systems and Computing
2018 | book
Análise e Avaliação de Tarefas de Movimentação Manual de Cargas numa Operadora de Handling
2018 | dissertation-thesis
Análise térmica da sobrecarga musculoesquelética na manipulação vertical de cargas: estudo piloto
2018 | dissertation-thesis
A Obesidade com Fator de Risco Musculoesquelético na Manipulação Vertical da Cargas
University of Minho
2017 | dissertation-thesis
A obesidade como fator de risco musculoesquelético na manipulação vertical de cargas
2017 | dissertation-thesis
Differences in muscular activity between obese and non-obese workers during manual lifting,Diferencias en la actividad muscular entre trabajadores obesos y no obesos durante la elevación manual de cargas
DYNA (Colombia)
2016 | journal-article
Obesity influence on perceived physical overload during vertical handling loads - A preliminary study
Sho2016: International Symposium on Occupational Safety and Hygiene
2016 | journal-article
Ergonomic analysis of the shaping post in the injection sector of a footwear industry
Occupational Safety and Hygiene III
2015 | book
Illuminance and whole body vibration evaluation in a company from footwear industry in Portugal
Sho2015: International Symposium on Occupational Safety and Hygiene
2015 | journal-article
Occupational noise exposure and the exposure to ototoxic substances: A case study in the injection sector in the footwear industry
Occupational Safety and Hygiene III
2015 | book
Risk assessment of work-related musculoskeletal disorders at a workplace from metalworking industry
Occupational Safety and Hygiene III
2015 | book
Study of the muscular activation in obese and non-obese subjects during lifting loads
Sho2015: International Symposium on Occupational Safety and Hygiene
2015 | journal-article
The effects of obesity on muscle activity during lifting tasks
Occupational Safety and Hygiene III
2015 | book
Muscle loading and psychophysical effects of obesity during vertical handling tasks
2014 | conference-paper
Obesity and physical loading during manual lifting
2014 | conference-paper
Effects of obesity on manual handling tasks: the perspective of occupational health practitioners
Occupational Safety and Hygiene - Sho2013
2013 | journal-article
Implications of obesity on occupational health
Occupational Safety and Hygiene - Proceedings of the International Symposium on Occupational Safety and Hygiene, SHO 2013
2013 | conference-paper
The obesity as a musculoskeletal risk factor in vertical handling loads
2012 | conference-paper
Manual materials handling: Knowledge and practices among Portuguese Health and Safety practitioners
Work
2011 | journal-article
Manual Materials Handling: Usability Test of a Selection Guide of Risk Evaluation Methods
Sho2010: International Symposium on Occupational Safety and Hygiene
2010 | journal-article
RATING THE RISK OF MANUAL HANDLING OF LOADS: HOW TO CHOOSE THE CORRECT METHOD?
Sho2009: International Symposium on Occupational Safety and Hygiene
2009 | journal-article
Tarefas de Manipulação Manual de Cargas: Métodos de Avaliação de Risco
University of Minho
2009 | dissertation-thesis
Tarefas de manipulação manual de cargas : selecção de métodos de avaliação de risco
2009 | dissertation-thesis
Dissertações de Mestrado em Ensino de Ciências: Disseminação de resultados. Dissertação de Mestrado em Ensino de Geologia e Biologia
University of Aveiro
2008 | dissertation-thesis
Dissertações de mestrados em Ensino de Ciências: disseminação de resultados
2008 | dissertation-thesis
History
Init | End | Change | Value |
---|
A novel human-centered methodology for assessing manual-to-collaborative safe conversion of workstations
Safety Science
2025 | journal-article
Digital and Virtual Technologies for Work-Related Biomechanical Risk Assessment: A Scoping Review
Safety
2024 | journal-article
Assessing the Short-Term Effects of Dual Back-Support Exoskeleton within Logistics Operations
Safety
2024 | journal-article
Understanding Musculoskeletal Loadings among Supermarket Checkout Counter Cashiers: A Biomechanical Analysis
Safety
2024 | journal-article
Comparison Between Anthropometric Equipment and Scanners in Hand Measurement
2024 | book-chapter
Development and Implementation of a Management Model of Ergonomic Conditions Supported by Autonomous Teams
2024 | book-chapter
Development of a Questionnaire to Understand Future Users’ Preferences About Human-Centric Autonomous Car Interior
2024 | book-chapter
Development of a Rapid Assessment Method of the Potentiality to Transform Manufacturing Workstations into an Assistive Collaborative System
2024 | book-chapter
Human-Centered Design Approach to the Development of a Graphical User-Interface for Visual Inspection Task: A Use-Case in the Aircraft Manufacturing
2024 | book-chapter
Designing a User-Centered Inspection Device’s Handle for the Aircraft Manufacturing Industry
Applied Sciences
2023 | journal-article
Establishing an anthropometric database: A case for the Portuguese working population
International Journal of Industrial Ergonomics
2023 | journal-article
Development of Guidelines for an Occupational Health and Safety Management Systems Towards Industry 4.0
2023 | book-chapter
Towards the Digital Transformation of Inspection Tasks in Aircraft Manufacturing Through a Human-Centric Design
2023 | book-chapter
Human–Robot Interaction in Industrial Settings: Perception of Multiple Participants at a Crossroad Intersection Scenario with Different Courtesy Cues
Robotics
2022 | journal-article
Ergonomic Study of a Support Interface for the Therapheet Device in the Rehabilitation of the Tibiotarsal Joint
2022 | book-chapter
Simulating Human-Robot Collaboration for Improving Ergonomics and Productivity in an Assembly Workstation: A Case Study
2022 | book-chapter
WIDEA: Waste Identification Diagram with Ergonomic Assessment—Towards the Integration of Lean and Ergonomics
2022 | book-chapter
Decision-Making Framework for Implementing Safer Human-Robot Collaboration Workstations: System Dynamics Modeling
Safety
2021 | journal-article
Digitalization of Musculoskeletal Risk Assessment in a Robotic-Assisted Assembly Workstation
Safety
2021 | journal-article
Ergonomics and Human Factors as a Requirement to Implement Safer Collaborative Robotic Workstations: A Literature Review
Safety
2021 | journal-article
Physical Ergonomic Improvement and Safe Design of an Assembly Workstation through Collaborative Robotics
Safety
2021 | journal-article
Lean Manufacturing and Ergonomics Integration: Defining Productivity and Wellbeing Indicators in a Human–Robot Workstation
Sustainability
2021 | journal-article
Método REBA - Rapid Entire Body Assessment (Hignett & McAtamney, 2000)
2021 | other
Método de Grieco, Occhipinti, Colombini e Molteni (1997)
2021 | other
Otimização da logística interna através da implementação de processos de sincronização no abastecimento às linhas de montagem
2021 | dissertation-thesis
Revised Strain Index RSI (Garg, Moore, & Kapellusch, 2017)
2021 | other
Thermographic differences due to dynamic work tasks on individuals with different obesity levels: a preliminary study
Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization
2020 | journal-article
Kinematics differences between obese and non-obese workers during vertical handling tasks
International Journal of Industrial Ergonomics
2020 | journal-article
Towards an Ergonomic Assessment Framework for Industrial Assembly Workstations—A Case Study
Applied Sciences
2020 | journal-article
Análise e redução do risco de circulação na zona de embalamento do produto acabado numa indústria de mobiliário
2020 | dissertation-thesis
Aplicação combinada de ferramentas Lean e de Ergonomia na melhoria do desempenho dos postos de trabalho numa empresa de capas de assentos para a indústria automóvel
2020 | dissertation-thesis
Ergonomic Assessment in Waste Sorting Jobs with Different Methods
2020 | book-chapter
Ergonomic intervention on a packing workstation with robotic aid - case study at a furniture manufacturing industry
Work
2020 | journal-article
Exposure to Musculoskeletal Risk of Piano Teachers
2020 | book-chapter
Human-Centered Approach for the Design of a Collaborative Robotics Workstation
2020 | book-chapter
Impacto na produção de células de robótica colaborativa em postos de operação manual
2020 | dissertation-thesis
Reducing 3M by Improved Layouts and Ergonomic Intervention in a Lean Journey in a Cork Company
2020 | book-chapter
Robots and human interaction in a furniture manufacturing industry - risk assessment
Advances in Intelligent Systems and Computing
2020 | book
Safety requirements for the design of collaborative robotic workstations in europe a review
2020 | conference-paper
Study and Analysis of a New Device for the Rehabilitation of the Tibiotarsal Joint
2020 | journal-article
The Effects of a Passive Exoskeleton on Muscle Activity and Discomfort in Industrial Tasks
2020 | book-chapter
A influência da utilização de um exoesqueleto passivo nos fatores de risco de lesões musculoesqueléticas durante tarefas industriais
2019 | dissertation-thesis
Effects of workers' Body Mass Index and task conditions on exertion psychophysics during Vertical Handling Tasks
Work
2019 | journal-article
Ergonomic Analysis of a Fuse Insertion, Press-fit and Test Workstation Using EWA Method - Ergonomic Workplace Analysis
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Ergonomic analysis of a bending workplace in a metalworking industry
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Ergonomic analysis of a manual material handling activity in the food sector
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Ergonomic assessment and workstation design in a furniture manufacturing industry—a case study
Studies in Systems, Decision and Control
2019 | book
Ergonomic assessment of a wire terminal crimping workstation
Studies in Systems, Decision and Control
2019 | book
Ergonomic assessment of study' places in an University dormitory - a pilot study
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Ergonomic study of nursing tasks in surgical hospital services
Advances in Intelligent Systems and Computing
2019 | book
Ergonomic study of workplaces at a textile company
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Implementação de um software de gestão de tempo no sistema produtivo automatizado
2019 | dissertation-thesis
Influence of the use of exoskeletons on workers' physical and psychophysical loading - a literature review
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Introduction of a mechanical equipment to assist manual handling loads in a textile industry - Example of an ergonomic study
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Lighting assessment at workplaces in a granite manufacturing company
Studies in Systems, Decision and Control
2019 | book
Manual materials handling: Case study at a portuguese handling company
Studies in Systems, Decision and Control
2019 | book
Noise Evaluation in a Workstation of a Furniture Manufacturer Company
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Obesity effects on muscular activity during lifting and lowering tasks
International Journal of Occupational Safety and Ergonomics
2019 | journal-article
Occupational noise exposure assessment - Case study in a weaving
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Study of risk factors that influence visual fatigue and musculoskeletal stress in an open office
2019 | dissertation-thesis
Thermal analysis of musculoskeletal overload in vertical handling of loads in an heterogeneous sample
Studies in Systems, Decision and Control
2019 | book
Thermal environment in freight transport - the case of a vehicle without air conditioning
SHO2019: INTERNATIONAL SYMPOSIUM ON OCCUPATIONAL SAFETY AND HYGIENE
2019 | journal-article
Workers’ Body Constitution as a Risk Factor During Manual Materials Handling
Advances in Intelligent Systems and Computing
2019 | book
Analysis of infrared imaging during vertical handling tasks in workers with different levels of obesity
Advances in Intelligent Systems and Computing
2018 | book
Análise e Avaliação de Tarefas de Movimentação Manual de Cargas numa Operadora de Handling
2018 | dissertation-thesis
Análise térmica da sobrecarga musculoesquelética na manipulação vertical de cargas: estudo piloto
2018 | dissertation-thesis
A Obesidade com Fator de Risco Musculoesquelético na Manipulação Vertical da Cargas
University of Minho
2017 | dissertation-thesis
A obesidade como fator de risco musculoesquelético na manipulação vertical de cargas
2017 | dissertation-thesis
Differences in muscular activity between obese and non-obese workers during manual lifting,Diferencias en la actividad muscular entre trabajadores obesos y no obesos durante la elevación manual de cargas
DYNA (Colombia)
2016 | journal-article
Obesity influence on perceived physical overload during vertical handling loads - A preliminary study
Sho2016: International Symposium on Occupational Safety and Hygiene
2016 | journal-article
Ergonomic analysis of the shaping post in the injection sector of a footwear industry
Occupational Safety and Hygiene III
2015 | book
Illuminance and whole body vibration evaluation in a company from footwear industry in Portugal
Sho2015: International Symposium on Occupational Safety and Hygiene
2015 | journal-article
Occupational noise exposure and the exposure to ototoxic substances: A case study in the injection sector in the footwear industry
Occupational Safety and Hygiene III
2015 | book
Risk assessment of work-related musculoskeletal disorders at a workplace from metalworking industry
Occupational Safety and Hygiene III
2015 | book
Study of the muscular activation in obese and non-obese subjects during lifting loads
Sho2015: International Symposium on Occupational Safety and Hygiene
2015 | journal-article
The effects of obesity on muscle activity during lifting tasks
Occupational Safety and Hygiene III
2015 | book
Muscle loading and psychophysical effects of obesity during vertical handling tasks
2014 | conference-paper
Obesity and physical loading during manual lifting
2014 | conference-paper
Effects of obesity on manual handling tasks: the perspective of occupational health practitioners
Occupational Safety and Hygiene - Sho2013
2013 | journal-article
Implications of obesity on occupational health
Occupational Safety and Hygiene - Proceedings of the International Symposium on Occupational Safety and Hygiene, SHO 2013
2013 | conference-paper
The obesity as a musculoskeletal risk factor in vertical handling loads
2012 | conference-paper
Manual materials handling: Knowledge and practices among Portuguese Health and Safety practitioners
Work
2011 | journal-article
Manual Materials Handling: Usability Test of a Selection Guide of Risk Evaluation Methods
Sho2010: International Symposium on Occupational Safety and Hygiene
2010 | journal-article
RATING THE RISK OF MANUAL HANDLING OF LOADS: HOW TO CHOOSE THE CORRECT METHOD?
Sho2009: International Symposium on Occupational Safety and Hygiene
2009 | journal-article
Tarefas de Manipulação Manual de Cargas: Métodos de Avaliação de Risco
University of Minho
2009 | dissertation-thesis
Tarefas de manipulação manual de cargas : selecção de métodos de avaliação de risco
2009 | dissertation-thesis
Dissertações de Mestrado em Ensino de Ciências: Disseminação de resultados. Dissertação de Mestrado em Ensino de Geologia e Biologia
University of Aveiro
2008 | dissertation-thesis
Dissertações de mestrados em Ensino de Ciências: disseminação de resultados
2008 | dissertation-thesis
Start | End | Term | Value | |
---|---|---|---|---|