Algoritmi | User | Ana Cristina Magalhães Ferreira
Ana Cristina Magalhães Ferreira
Ana Cristina Magalhães Ferreira
At Algoritmi
Academic Degree
PhD
Current Position
Other at Escola de Engenharia da Universidade do Minho
Personal Webpage
Personal Email
acferreira@dps.uminho.ptOrcid
0000-0002-4775-5713Researcher ID
01/01/6032 20:16FCT Public Key
J53252927TX5
Ciência ID
7B1F-DA2F-1A12Google Scholar
h-index
10Publications
51Editorial
0Citations
349Q1 / Q2
12About Me 
ANA C.M. FERREIRA (Ph.D.) is an Assistant Professor at the Faculty of Engineering and Technologies at Lusíada Norte University (Vila Nova de Famalicão Campus) and a researcher at ALGORITMI and MEtRICs centers, both research units from the School of Engineering, University of Minho. She is a Post-Doc Researcher and collaborator member at ALGORITMI Centre, within the Industrial Engineering and Management (IEM) research line, Ergonomics & Human Factors Group (EHF). Additionally, she is also an integrated member of MEtRICs - Mechanical Engineering and Resource Sustainability Center. Her current research project is entitled "Optimization of Innovative CHP Systems driven by Renewable Energy Technologies", supported by the Portuguese Foundation for Science and Technology (FCT) through the grant SFRH/BPD/121446/2016. She was enrolled at the University of Minho in 2004, when started to study Biomedical Engineering. In 2009, after concluding her master degree (MSc) in Biomaterials Rehabilitation and Biomechanics, she initiated her research in the fields of Mechanical and Industrial Engineering, being funded by the Portuguese Foundation for Science and Technology through a PhD grant (between 2010 and 2014) and more recently by a Post-doctoral funding. Between 2010 and 2014, she actively participated as a member of Women in Engineering – Portugal (WIE-P), an affinity group of IEEE association. Regarding her Professional & Academic Experience, between 2014 and 2015 she was a fellow researcher at a consortium between University of Minho and the BOSCH Multimedia Car Service, within the project "HMIEXCEL - Advanced for Automotive multimedia solutions" and the project "iFACTORY/CQPCB04/2015". Between 2011 and 2014, she lectured as Invited Assistant professor at both the Department of Mechanical Engineering (DEM) and at the Department of Production and Systems (DPS) at the School of Engineering of University of Minho. She has been involved in several research areas including the following: A) Energy conversion and management; B) Optimization of renewable cogeneration systems; C) Industrial cost analysis; D) Study of heat transfer problems for high complexity PCB assembly; E) Applications of Lean Management and Ergonomics in industrial contexts.
Publications (101)
Different Teaching Methods
2023 | book-chapter
An adapted analytic hierarchy process for the supplier selection : model validation for a textile industry application
ICOTEM 2023 – International Conference on Technology Management and Operations
2023 | conference-paper
Application of SMED to reduce parameterization times in the production of corrugated carton packaging Description of the case study
ICOTEM 2023 – International Conference on Technology Management and Operations
2023 | conference-paper
Design and Performance Assessment of a Double-Screen Trommel for MSW Separation
Lecture Notes in Mechanical Engineering
2023 | book
Development and Assessment of an IoT System for Monitoring Air and Soil Quality in the Agricultural Sector
36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2023)
2023 | conference-paper
Development of a Numerical Optimization Model for Sizing Hydrogen Refuelling Stations: Application to a Case Study
36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2023)
2023 | conference-paper
Influence of Typical Meteorological Years on the Optimization of Incident Solar Radiation for PV Applications in Portugal
Lecture Notes in Electrical Engineering
2023 | book
Is Critical Thinking a Skill or a Way to Develop Skills? An Overview in Engineering Education
Lecture Notes in Mechanical Engineering
2023 | book
Optimization of collector area and storage volume in domestic solar water heating systems with on–off control—A thermal energy analysis based on a pre-specified system performance
Applied Thermal Engineering
2023 | journal-article
Procurement Operations : An empirical study about the reality of Portuguese SMEs
ICOTEM 2023 – International Conference on Technology Management and Operations
2023 | conference-paper
Skin Follicles Dispersion Within a Hospital Operating Room—How to Predict and Reduce the Contamination
Studies in Systems, Decision and Control
2023 | book
Thermal Comfort Assessment of a Small House in Portugal Using EnergyPlus and Ansys Fluent
Lecture Notes in Electrical Engineering
2023 | book
Assessment of PMV accuracy for different locations using the ASHRAE Thermal Comfort Database II
XV Congresso Ibero-americano de Engenharia Mecânica
2022 | conference-paper
Supplier Selection and Procurement: Key Criteria and Purchasing Strategies
ICNAAM 2022 - 20th International Conference on Numeral Analysis and Applied Mathematics
2022 | conference-paper
Incorporation of renewable energies, energy storage and efficiency measures in the energy transition of the Portuguese industry: challenges to decarbonisation
Procedings of ECOS 2022 - The 35rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2022 | conference-paper
2D SIMULATION OF THE PLACEMENT OF A PIN-THROUGH-HOLE COMPONENT AND SOLDER PASTE MELTING
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2022 | conference-paper
A practical and economic approach in defining internal logistic delivery routes: a case study in automotive industry
Studies in Computational Intelligence - DECON: The International Conference on Decision Economics series
2022 | book-chapter
DESIGN AND OPERATIONAL ANALYSIS OF A PHOTOVOLTAIC IRRIGATION SYSTEM
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2022 | conference-paper
Fatores que afetam as compras nas PMEs : a seleção de fornecedores
2022 | book-chapter
Internal Logistics Process Improvement using PDCA: A Case Study in the Automotive Sector
Business Systems Research
2022 | journal-article
SUMMER GRANTS 'VERÃO COM CIÊNCIA', FROM FOUNDATION FOR SCIENCE AND TECHNOLOGY, IN PORTUGAL: EXPERIENCE AND ACHIEVEMENTS
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2022 | conference-paper
Supplier selection and procurement in SMEs: Insights from the literature on key criteria and purchasing strategies
Engineering Management in Production and Services
2022 | journal-article
A PDCA-BASED APPROACH TO IMPROVE THE LOGISTIC SUPPLY OF AN ASSEMBLY LINE IN THE AUTOMOBILE SECTOR: A CASE STUDY
Proceedings of the 16th International Symposium on Operational Research in Slovenia, SOR 2021
2021 | conference-paper
Application of a cost-benefit model to evaluate the investment viability of the small-scale cogeneration systems in the portuguese context
International Journal of Sustainable Energy Planning and Management
2021 | journal-article
Decentralized Forest Biomass Residues Thermal Power Plant Potential: An Economic and Environmental Perspective
ECOS 2021 - 34th International Conference on Efficency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2021 | conference-paper
Engineering Student Attitude Towards New Technologies Employed in Active Teaching
Advances in Intelligent Systems and Computing
2021 | book
Impact of Lean Tools on Companies During Industrial Engineering Projects Implementation: A Correlation Study
Springer Proceedings in Mathematics and Statistics
2021 | conference-paper
Numerical study of the unsteady flow in simplified and realistic iliac bifurcation models
Fluids
2021 | journal-article
STEADY FLOW STUDIES OF THE GEOMETRY EFFECTS ON THE RECIRCULATION PROPERTIES AT THE ILIAC BIFURCATION
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2021 | conference-paper
Sawdust drying process in a large-scale pellets facility: An energy and exergy analysis
Cleaner Environmental Systems
2021 | journal-article
Analysis of the cost and energy value of forest biomass production: From harvest to end-use
ECOS 2020 - Proceedings of the 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2020 | conference-paper
Application of a costing methodology to estimate capital costs of solar thermal systems in residential Portuguese context
International Journal of Sustainable Energy Planning and Management
2020 | journal-article
Assessment of the Stirling engine performance comparing two renewable energy sources: Solar energy and biomass
Renewable Energy
2020 | journal-article
Multi-objective optimization of solar thermal systems applied to portuguese dwellings
Energies
2020 | journal-article
A symbiotic relationship between Lean Production and Ergonomics: Insights from Industrial Engineering final year projects
International Journal of Industrial Engineering and Management
2019 | journal-article
Analysis of the different renewable energy sources in the performance of a Stirling engine
ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2019 | conference-paper
CFD simulation of an Alfa-Stirling engine to study the geometrical parameters on the engine performance
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2019 | conference-paper
DEVELOPMENT OF A COSTING METHODOLOGY FOR SOLAR THERMAL SYSTEMS: APPLICATION TO PORTUGUESE SCENARIO
PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT (ICEE)
2019 | journal-article
Effectiveness of SCRUM in project based learning: Students view
Lecture Notes in Electrical Engineering
2019 | book
Multi-objective Optimization of Solar Thermal Systems Applied to Residential Building in Portugal
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
2019 | book
STUDY OF THE ECONOMIC VIABILITY OF COGENERATION SYSTEMS IN PORTUGAL: THE IMPACT OF LEGISLATION ON THE INVESTMENT DECISION
PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT (ICEE)
2019 | journal-article
Thermal energy storage for concentrated solar systems: A technical review and economic considerations
ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2019 | conference-paper
Lean production and ergonomics: a synergy to improve productivity and working conditions
International Journal of Occupational and Environmental Safety
2018 | journal-article
Application of Cost-Benefit analysis to identify the potential of small-scale cogeneration systems in portuguese building sector
ECOS 2018 - Proceedings of the 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2018 | conference-paper
Thermal-economic optimisation of a CHP gas turbine system by applying a fit-problem genetic algorithm
International Journal of Sustainable Energy
2018 | journal-article
Integration of Ergonomics and Lean Production to improve productivity and working conditions
Occupational Safety and Hygiene - SHO2017
2017 | conference-paper
DEVELOPMENT OF A METHODOLOGY TO ESTIMATE THE CAPITAL COSTS OF THERMAL ENERGY STORAGE SYSTEMS
2017 | conference-paper
Design of a solar dish Stirling cogeneration system: Application of a multi-objective optimization approach
Applied Thermal Engineering
2017 | journal-article
Modelling stirling engines for CHP applications: Analysis of the mechanical and thermal losses
30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2017
2017 | conference-paper
Parametric analysis of the thermal components of an alpha-stirling engine for cogeneration applications
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2017 | conference-paper
CFD modeling the cooling stage of reflow soldering process
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2016 | conference-paper
Contact angle measurement of SAC 305 solder: numerical and experimental approach
Journal of Materials Science: Materials in Electronics
2016 | journal-article
Emergy evaluation of regions and sub-regions: Application to Portugal
ECOS 2016 - Proceedings of the 29th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems
2016 | conference-paper
Thermal-economic design of a solar dish stirling cogeneration system using a multi-objective approach
ECOS 2016 - Proceedings of the 29th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems
2016 | conference-paper
Thermodynamic and economic optimization of a solar-powered Stirling engine for micro-cogeneration purposes
Energy
2016 | journal-article
Application of GA in the Design of a Stirling Engine-Based Micro-CHP System
Proceedings of 27th European Conference on Operational Research
2015 | conference-abstract
Application of genetic algorithms in the optimization of a thermal system based on micro-chp gas turbines
ECOS 2015 - 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2015 | conference-paper
Design optimization of a solar dish collector for its application with stirling engines
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2015 | conference-paper
Mentoring relationships: Shedding light on PhD student perspective
Advances in Intelligent Systems and Computing
2015 | book
OVERVIEW ON ENERGY TRENDS AND COGENERATION POTENTIAL IN EUROPE
Proceedings of the 2nd International Conference on Energy & Environment: Bringing Together Engineering and Economics
2015 | conference-paper
Talking about mentoring relationships from the perspectives of PhD students: A conceptual model developement
Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015
2015 | conference-paper
Thermal-economic design of a micro-gas turbine CHP system using a multi-objective optimization approach
PANACM 2015 - 1st Pan-American Congress on Computational Mechanics, in conjunction with the 11th Argentine Congress on Computational Mechanics, MECOM 2015
2015 | conference-paper
Thermodynamic and economic optimization of a solar-powered stirling engine for micro-cogeneration purposes
ECOS 2015 - 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2015 | conference-paper
Analysis of the geometrical parameters of thermal components in a stirling engine
11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014
2014 | conference-paper
COST-BENEFIT MODEL APPLIED TO THE OPTIMIZATION OF THERMAL SYSTEMS BASED ON A STIRLING ENGINE
International Conference on Production Economics and Project Evaluation (icopev)
2014 | journal-article
Cost-Benefit Model Applied to the Optimization of Thermal Systems Based on a Stirling Engine
ICOPEV ’2014- 2nd International Conference on Project Economic Evaluation
2014 | conference-paper
EFFICIENCY OF VALVED HOLDING CHAMBERS: NUMERICAL COMPARISON STUDY AT CONSTANT FLOW
Journal of Aerosol Medicine and Pulmonary Drug Delivery
2014 | journal-article
Maximum profit of a cogeneration system based on stirling thermodynamic cycle
Proceedings - 14th International Conference on Computational Science and Its Applications, ICCSA 2014
2014 | conference-paper
Modelling and Cost Estimation of Stirling Engine for CHP Applications
International Conference on Power Systems, Energy, Environment
2014 | conference-paper
Numerical Optimization and Economic Analysis in the design of a Micro-CHP System with a Stirling engine and a Solar Collector
Doctoral thesis, University of Minho, Guimarães, Portugal, April 2014.
2014 | dissertation-thesis
Numerical study of regenerator configuration in the design of a stirling engine
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2014 | conference-paper
Optimization of Cogeneration Systems applying Direct Search Methods
OPTIMIZATION 2014 Conference
2014 | conference-abstract
Technical-economic evaluation of a cogeneration technology considering carbon emission savings
International Journal of Sustainable Energy Planning and Management
2014 | journal-article
Thermal analysis and cost estimation of Stirling cycle engine
WSEAS Transactions on Power Systems
2014 | journal-article
Exergy efficiency optimization for gas turbine based cogeneration systems
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2013 | conference-paper
Factors that can influence mentorship relationships in advanced education: Critical insight
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2013 | conference-paper
PMDI spray plume analysis: ACFD study
Lecture Notes in Engineering and Computer Science
2013 | conference-paper
Shedding light on important mentorship relationships issues in advanced engineering education
Proceedings - 2013 1st International Conference of the Portuguese Society for Engineering Education, CISPEE 2013
2013 | conference-paper
Techno-Economic Evaluation of Cogeneration Units Considering Carbon Emission Savings
ICEE - 1st International Congress on Energy & Environment: bringing together Economics and Engineering
2013 | conference-paper
Techno-Economic and Exergy Analysis of a Small-Scale CHP Unit Based on a Micro-gas Turbine
MICROGEN 3 International Conference on Microgeneration and Related Technologies
2013 | conference-paper
Thermal- economic modeling of a micro-CHP unit based on a stirling engine
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2013 | conference-paper
A review of stirling engine technologies applied to micro-cogeneration systems
Proceedings of the 25th International Conference on Efficiency, Cost, Optimization and Simulation of Energy Conversion Systems and Processes, ECOS 2012
2012 | conference-paper
An economic perspective on the optimisation of a small-scale cogeneration system for the Portuguese scenario
Energy
2012 | journal-article
Innovation of Decentralised Power Production: The Sustainability of Micro-Cogeneration for the Portuguese Market
Proceedings of the 7th European Conference on Innovation and Entrepreneurship, Vols 1 and 2
2012 | conference-paper
Modeling a stirling engine for cogeneration applications
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2012 | conference-paper
On solving the profit maximization of small cogeneration systems
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
2012 | book
Optimization Methods in the Design of Small-Cogeneration Systems for Building Sector
Book of Abstracts of the Scientific Interaction Meetings (SIM)
2012 | conference-abstract
Optimization of Small Scale Cogeneration Systems: Comparison of Nonlinear Optimization Algorithms
YIC 2012 - ECCOMAS Young Investigators Conference
2012 | conference-paper
Techno-Economic Assessment of Micro-CHP Systems
XVIII International Conference on Industrial Engineering and Operations Management (ICIEOM)
2012 | conference-paper
An economic perspective on small-scale cogeneration systems optimisation
Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011
2011 | conference-paper
Development of a Cost-benefit Model for Micro CHP Systems
ICOPEV ’2011 1st International Conference on Project Economic Evaluation
2011 | conference-paper
Development of a Thermo-Economic Model for a Micro-CHP System: Heat Demand Assessment
2011 | conference-abstract
Numerical Study of Local Stenosis Development at Abdominal Aorta Bifurcations
Abdominal Aorta Bifurcations. In M. A. et al (Eds) L. Roseiro (Ed.), 4º Congresso Nacional de Biomecânica
2011 | conference-paper
Optimal design of micro-turbine cogeneration systems for the portuguese buildings sector
ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011
2011 | conference-paper
Optimization of a small-scale cogeneration system as a function of the thermal demand
4th International Congress on Energy and Environment Engineering and Management
2011 | conference-paper
Spacer Design Optimization using CFD Software
CFD & OPTIMIZATION 2011 - An ECCOMAS Thematic Conference
2011 | conference-paper
Thermo-Economic Optimization of CHP Systems: from large to small scale applications
International Journal of Engineering and Industrial Management
2011 | journal-article
Contributions to the study of blood flow in the abdominal aorta and its branches
ASME International Mechanical Engineering Congress and Exposition, Proceedings
2010 | conference-paper
Development and evaluation of a micro-cogeneration prototype for residential applications
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2010 | conference-paper
Contributions to the study of blood flow in the abdominal aorta and its branches
Master thesis, University of Minho, Guimarães, Portugal, September 2009
2009 | dissertation-thesis
Numerical Study of Blood Flow in a Vessel with Increasing Degree of Stenosis Using Dynamic Meshes
XIII Congreso Internacional de Ingeniería de Proyectos
2009 | conference-paper
History
| Init | End | Change | Value |
|---|
Different Teaching Methods
2023 | book-chapter
An adapted analytic hierarchy process for the supplier selection : model validation for a textile industry application
ICOTEM 2023 – International Conference on Technology Management and Operations
2023 | conference-paper
Application of SMED to reduce parameterization times in the production of corrugated carton packaging Description of the case study
ICOTEM 2023 – International Conference on Technology Management and Operations
2023 | conference-paper
Design and Performance Assessment of a Double-Screen Trommel for MSW Separation
Lecture Notes in Mechanical Engineering
2023 | book
Development and Assessment of an IoT System for Monitoring Air and Soil Quality in the Agricultural Sector
36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2023)
2023 | conference-paper
Development of a Numerical Optimization Model for Sizing Hydrogen Refuelling Stations: Application to a Case Study
36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2023)
2023 | conference-paper
Influence of Typical Meteorological Years on the Optimization of Incident Solar Radiation for PV Applications in Portugal
Lecture Notes in Electrical Engineering
2023 | book
Is Critical Thinking a Skill or a Way to Develop Skills? An Overview in Engineering Education
Lecture Notes in Mechanical Engineering
2023 | book
Optimization of collector area and storage volume in domestic solar water heating systems with on–off control—A thermal energy analysis based on a pre-specified system performance
Applied Thermal Engineering
2023 | journal-article
Procurement Operations : An empirical study about the reality of Portuguese SMEs
ICOTEM 2023 – International Conference on Technology Management and Operations
2023 | conference-paper
Skin Follicles Dispersion Within a Hospital Operating Room—How to Predict and Reduce the Contamination
Studies in Systems, Decision and Control
2023 | book
Thermal Comfort Assessment of a Small House in Portugal Using EnergyPlus and Ansys Fluent
Lecture Notes in Electrical Engineering
2023 | book
Assessment of PMV accuracy for different locations using the ASHRAE Thermal Comfort Database II
XV Congresso Ibero-americano de Engenharia Mecânica
2022 | conference-paper
Supplier Selection and Procurement: Key Criteria and Purchasing Strategies
ICNAAM 2022 - 20th International Conference on Numeral Analysis and Applied Mathematics
2022 | conference-paper
Incorporation of renewable energies, energy storage and efficiency measures in the energy transition of the Portuguese industry: challenges to decarbonisation
Procedings of ECOS 2022 - The 35rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2022 | conference-paper
2D SIMULATION OF THE PLACEMENT OF A PIN-THROUGH-HOLE COMPONENT AND SOLDER PASTE MELTING
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2022 | conference-paper
A practical and economic approach in defining internal logistic delivery routes: a case study in automotive industry
Studies in Computational Intelligence - DECON: The International Conference on Decision Economics series
2022 | book-chapter
DESIGN AND OPERATIONAL ANALYSIS OF A PHOTOVOLTAIC IRRIGATION SYSTEM
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2022 | conference-paper
Fatores que afetam as compras nas PMEs : a seleção de fornecedores
2022 | book-chapter
Internal Logistics Process Improvement using PDCA: A Case Study in the Automotive Sector
Business Systems Research
2022 | journal-article
SUMMER GRANTS 'VERÃO COM CIÊNCIA', FROM FOUNDATION FOR SCIENCE AND TECHNOLOGY, IN PORTUGAL: EXPERIENCE AND ACHIEVEMENTS
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2022 | conference-paper
Supplier selection and procurement in SMEs: Insights from the literature on key criteria and purchasing strategies
Engineering Management in Production and Services
2022 | journal-article
A PDCA-BASED APPROACH TO IMPROVE THE LOGISTIC SUPPLY OF AN ASSEMBLY LINE IN THE AUTOMOBILE SECTOR: A CASE STUDY
Proceedings of the 16th International Symposium on Operational Research in Slovenia, SOR 2021
2021 | conference-paper
Application of a cost-benefit model to evaluate the investment viability of the small-scale cogeneration systems in the portuguese context
International Journal of Sustainable Energy Planning and Management
2021 | journal-article
Decentralized Forest Biomass Residues Thermal Power Plant Potential: An Economic and Environmental Perspective
ECOS 2021 - 34th International Conference on Efficency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2021 | conference-paper
Engineering Student Attitude Towards New Technologies Employed in Active Teaching
Advances in Intelligent Systems and Computing
2021 | book
Impact of Lean Tools on Companies During Industrial Engineering Projects Implementation: A Correlation Study
Springer Proceedings in Mathematics and Statistics
2021 | conference-paper
Numerical study of the unsteady flow in simplified and realistic iliac bifurcation models
Fluids
2021 | journal-article
STEADY FLOW STUDIES OF THE GEOMETRY EFFECTS ON THE RECIRCULATION PROPERTIES AT THE ILIAC BIFURCATION
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2021 | conference-paper
Sawdust drying process in a large-scale pellets facility: An energy and exergy analysis
Cleaner Environmental Systems
2021 | journal-article
Analysis of the cost and energy value of forest biomass production: From harvest to end-use
ECOS 2020 - Proceedings of the 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2020 | conference-paper
Application of a costing methodology to estimate capital costs of solar thermal systems in residential Portuguese context
International Journal of Sustainable Energy Planning and Management
2020 | journal-article
Assessment of the Stirling engine performance comparing two renewable energy sources: Solar energy and biomass
Renewable Energy
2020 | journal-article
Multi-objective optimization of solar thermal systems applied to portuguese dwellings
Energies
2020 | journal-article
A symbiotic relationship between Lean Production and Ergonomics: Insights from Industrial Engineering final year projects
International Journal of Industrial Engineering and Management
2019 | journal-article
Analysis of the different renewable energy sources in the performance of a Stirling engine
ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2019 | conference-paper
CFD simulation of an Alfa-Stirling engine to study the geometrical parameters on the engine performance
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2019 | conference-paper
DEVELOPMENT OF A COSTING METHODOLOGY FOR SOLAR THERMAL SYSTEMS: APPLICATION TO PORTUGUESE SCENARIO
PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT (ICEE)
2019 | journal-article
Effectiveness of SCRUM in project based learning: Students view
Lecture Notes in Electrical Engineering
2019 | book
Multi-objective Optimization of Solar Thermal Systems Applied to Residential Building in Portugal
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
2019 | book
STUDY OF THE ECONOMIC VIABILITY OF COGENERATION SYSTEMS IN PORTUGAL: THE IMPACT OF LEGISLATION ON THE INVESTMENT DECISION
PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT (ICEE)
2019 | journal-article
Thermal energy storage for concentrated solar systems: A technical review and economic considerations
ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2019 | conference-paper
Lean production and ergonomics: a synergy to improve productivity and working conditions
International Journal of Occupational and Environmental Safety
2018 | journal-article
Application of Cost-Benefit analysis to identify the potential of small-scale cogeneration systems in portuguese building sector
ECOS 2018 - Proceedings of the 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2018 | conference-paper
Thermal-economic optimisation of a CHP gas turbine system by applying a fit-problem genetic algorithm
International Journal of Sustainable Energy
2018 | journal-article
Integration of Ergonomics and Lean Production to improve productivity and working conditions
Occupational Safety and Hygiene - SHO2017
2017 | conference-paper
DEVELOPMENT OF A METHODOLOGY TO ESTIMATE THE CAPITAL COSTS OF THERMAL ENERGY STORAGE SYSTEMS
2017 | conference-paper
Design of a solar dish Stirling cogeneration system: Application of a multi-objective optimization approach
Applied Thermal Engineering
2017 | journal-article
Modelling stirling engines for CHP applications: Analysis of the mechanical and thermal losses
30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2017
2017 | conference-paper
Parametric analysis of the thermal components of an alpha-stirling engine for cogeneration applications
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2017 | conference-paper
CFD modeling the cooling stage of reflow soldering process
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2016 | conference-paper
Contact angle measurement of SAC 305 solder: numerical and experimental approach
Journal of Materials Science: Materials in Electronics
2016 | journal-article
Emergy evaluation of regions and sub-regions: Application to Portugal
ECOS 2016 - Proceedings of the 29th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems
2016 | conference-paper
Thermal-economic design of a solar dish stirling cogeneration system using a multi-objective approach
ECOS 2016 - Proceedings of the 29th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems
2016 | conference-paper
Thermodynamic and economic optimization of a solar-powered Stirling engine for micro-cogeneration purposes
Energy
2016 | journal-article
Application of GA in the Design of a Stirling Engine-Based Micro-CHP System
Proceedings of 27th European Conference on Operational Research
2015 | conference-abstract
Application of genetic algorithms in the optimization of a thermal system based on micro-chp gas turbines
ECOS 2015 - 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2015 | conference-paper
Design optimization of a solar dish collector for its application with stirling engines
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2015 | conference-paper
Mentoring relationships: Shedding light on PhD student perspective
Advances in Intelligent Systems and Computing
2015 | book
OVERVIEW ON ENERGY TRENDS AND COGENERATION POTENTIAL IN EUROPE
Proceedings of the 2nd International Conference on Energy & Environment: Bringing Together Engineering and Economics
2015 | conference-paper
Talking about mentoring relationships from the perspectives of PhD students: A conceptual model developement
Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015
2015 | conference-paper
Thermal-economic design of a micro-gas turbine CHP system using a multi-objective optimization approach
PANACM 2015 - 1st Pan-American Congress on Computational Mechanics, in conjunction with the 11th Argentine Congress on Computational Mechanics, MECOM 2015
2015 | conference-paper
Thermodynamic and economic optimization of a solar-powered stirling engine for micro-cogeneration purposes
ECOS 2015 - 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
2015 | conference-paper
Analysis of the geometrical parameters of thermal components in a stirling engine
11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014
2014 | conference-paper
COST-BENEFIT MODEL APPLIED TO THE OPTIMIZATION OF THERMAL SYSTEMS BASED ON A STIRLING ENGINE
International Conference on Production Economics and Project Evaluation (icopev)
2014 | journal-article
Cost-Benefit Model Applied to the Optimization of Thermal Systems Based on a Stirling Engine
ICOPEV ’2014- 2nd International Conference on Project Economic Evaluation
2014 | conference-paper
EFFICIENCY OF VALVED HOLDING CHAMBERS: NUMERICAL COMPARISON STUDY AT CONSTANT FLOW
Journal of Aerosol Medicine and Pulmonary Drug Delivery
2014 | journal-article
Maximum profit of a cogeneration system based on stirling thermodynamic cycle
Proceedings - 14th International Conference on Computational Science and Its Applications, ICCSA 2014
2014 | conference-paper
Modelling and Cost Estimation of Stirling Engine for CHP Applications
International Conference on Power Systems, Energy, Environment
2014 | conference-paper
Numerical Optimization and Economic Analysis in the design of a Micro-CHP System with a Stirling engine and a Solar Collector
Doctoral thesis, University of Minho, Guimarães, Portugal, April 2014.
2014 | dissertation-thesis
Numerical study of regenerator configuration in the design of a stirling engine
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2014 | conference-paper
Optimization of Cogeneration Systems applying Direct Search Methods
OPTIMIZATION 2014 Conference
2014 | conference-abstract
Technical-economic evaluation of a cogeneration technology considering carbon emission savings
International Journal of Sustainable Energy Planning and Management
2014 | journal-article
Thermal analysis and cost estimation of Stirling cycle engine
WSEAS Transactions on Power Systems
2014 | journal-article
Exergy efficiency optimization for gas turbine based cogeneration systems
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2013 | conference-paper
Factors that can influence mentorship relationships in advanced education: Critical insight
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2013 | conference-paper
PMDI spray plume analysis: ACFD study
Lecture Notes in Engineering and Computer Science
2013 | conference-paper
Shedding light on important mentorship relationships issues in advanced engineering education
Proceedings - 2013 1st International Conference of the Portuguese Society for Engineering Education, CISPEE 2013
2013 | conference-paper
Techno-Economic Evaluation of Cogeneration Units Considering Carbon Emission Savings
ICEE - 1st International Congress on Energy & Environment: bringing together Economics and Engineering
2013 | conference-paper
Techno-Economic and Exergy Analysis of a Small-Scale CHP Unit Based on a Micro-gas Turbine
MICROGEN 3 International Conference on Microgeneration and Related Technologies
2013 | conference-paper
Thermal- economic modeling of a micro-CHP unit based on a stirling engine
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2013 | conference-paper
A review of stirling engine technologies applied to micro-cogeneration systems
Proceedings of the 25th International Conference on Efficiency, Cost, Optimization and Simulation of Energy Conversion Systems and Processes, ECOS 2012
2012 | conference-paper
An economic perspective on the optimisation of a small-scale cogeneration system for the Portuguese scenario
Energy
2012 | journal-article
Innovation of Decentralised Power Production: The Sustainability of Micro-Cogeneration for the Portuguese Market
Proceedings of the 7th European Conference on Innovation and Entrepreneurship, Vols 1 and 2
2012 | conference-paper
Modeling a stirling engine for cogeneration applications
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2012 | conference-paper
On solving the profit maximization of small cogeneration systems
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
2012 | book
Optimization Methods in the Design of Small-Cogeneration Systems for Building Sector
Book of Abstracts of the Scientific Interaction Meetings (SIM)
2012 | conference-abstract
Optimization of Small Scale Cogeneration Systems: Comparison of Nonlinear Optimization Algorithms
YIC 2012 - ECCOMAS Young Investigators Conference
2012 | conference-paper
Techno-Economic Assessment of Micro-CHP Systems
XVIII International Conference on Industrial Engineering and Operations Management (ICIEOM)
2012 | conference-paper
An economic perspective on small-scale cogeneration systems optimisation
Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011
2011 | conference-paper
Development of a Cost-benefit Model for Micro CHP Systems
ICOPEV ’2011 1st International Conference on Project Economic Evaluation
2011 | conference-paper
Development of a Thermo-Economic Model for a Micro-CHP System: Heat Demand Assessment
2011 | conference-abstract
Numerical Study of Local Stenosis Development at Abdominal Aorta Bifurcations
Abdominal Aorta Bifurcations. In M. A. et al (Eds) L. Roseiro (Ed.), 4º Congresso Nacional de Biomecânica
2011 | conference-paper
Optimal design of micro-turbine cogeneration systems for the portuguese buildings sector
ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011
2011 | conference-paper
Optimization of a small-scale cogeneration system as a function of the thermal demand
4th International Congress on Energy and Environment Engineering and Management
2011 | conference-paper
Spacer Design Optimization using CFD Software
CFD & OPTIMIZATION 2011 - An ECCOMAS Thematic Conference
2011 | conference-paper
Thermo-Economic Optimization of CHP Systems: from large to small scale applications
International Journal of Engineering and Industrial Management
2011 | journal-article
Contributions to the study of blood flow in the abdominal aorta and its branches
ASME International Mechanical Engineering Congress and Exposition, Proceedings
2010 | conference-paper
Development and evaluation of a micro-cogeneration prototype for residential applications
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2010 | conference-paper
Contributions to the study of blood flow in the abdominal aorta and its branches
Master thesis, University of Minho, Guimarães, Portugal, September 2009
2009 | dissertation-thesis
Numerical Study of Blood Flow in a Vessel with Increasing Degree of Stenosis Using Dynamic Meshes
XIII Congreso Internacional de Ingeniería de Proyectos
2009 | conference-paper
| Start | End | Term | Value | |
|---|---|---|---|---|
